Westell Technologies 2100 manual User Guide

User Guide WireSpeed Dual Connect NAT Router

Enter the VPI and VCI values that you obtained from your Internet Service Provider. Click on next.

NOTE: Depending on your Internet Service Provider, the VPI/VCI screen may come pre- configured and it will be displayed here. In this case, you will not be able to change any values in this screen. Click on next to go to the PROTOCOL screen.

Select the Protocol type that you obtained from your Internet service provider. Click on next.

NOTE: Depending on your Internet Service Provider, the PROTOCOL screen may come pre-configured and it will be displayed here. In this case, you will need to click on next to go to the SET-UP COMPLETE screen.

030-300198 Rev. D 26 March 2003