Westell Technologies 2100 manual Public LAN Configuration, Check Private LAN Dhcp Settings

User Guide WireSpeed Dual Connect NAT Router

If the settings you have entered in the Private LAN Configuration screen are incorrect, the following warnings messages may be displayed via pop-up screens. If this occurs, check the settings in the Private LAN Configuration screen.

Warning Message	Check Private LAN DHCP Settings
Start Address is not part of the Subnet	Check the value in the DHCP Start Address field
End Address is not part of the Subnet	Check the value in the DHCP End Address field
End Address is below the Start Address	Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds	Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 53	Check the Seconds value in the DHCP Lease Time field
Minutes must be between 0 and 59	Check the Minutes value in the DHCP Lease Time field
Hours must be between 0 and 23	Check the Hours value in the DHCP Lease Time field

Public LAN Configuration

The following screen will be displayed if you select Public LAN Configuration from the Configuration menu.

NOTE: The Public LAN feature, if available from your service provider, allows the Router to use LAN IP addresses that are accessible from the WAN. Public LAN allows your computer to have global address ability. To utilize the Public LAN feature on your Router, your ISP must support Public LAN and Static IP. Contact your ISP for details.

Public LAN DHCP Server Enable	Default = NOT CHECKED
	If this box is CHECKED, it enables DHCP addresses to be served
	from the Public LAN pool.
Public LAN Enable	Default = NOT CHECKED
	If this box is CHECKED, it enables the addresses from the Public
	LAN to bypass the NAT interface.
Public LAN IP Address	Provides a Public IP Address if the service provider does not
	automatically provide one.
Public LAN Subnet Mask	Provides a Public Subnet Mask if the service provider does not
	automatically provide one.
030-300198 Rev. D	53	March 2003