User Guide | WireSpeed Dual Connect NAT Router |
Remote Access
The following screen will appear if you select Remote Access from the Maintenance menu. To enable Remote Access, type in a password and click on the enable remote access button.
Enabling Remote access allows your Internet service provider to access your Router via HTTP web screens. This feature can be activated only when the user wants to grant access rights to the Internet service provider
NOTE: The password should be at least 4 characters long and should not exceed 32 characters. Do not type a blank space or asterisks in the Password field. The password is also case sensitive.
User Name | Displays your current User Name (Static field) |
Password | Field for entering your password |
URL | Displays the IP address of the remote management gateway |
The following screen displays a message that the remote access is currently enabled. After 20 minutes of inactivity, or on reboot, remote access will be disabled automatically. To disable remote access, click on the disable remote access button.
| 81 | March 2003 |