Westell Technologies 2100 manual Port Forwarding Trigger Ports

User Guide WireSpeed Dual Connect NAT Router

Service Name	The NAT service you selected.
Local IP Address	If a static IP address has been assigned, it will be displayed here.
Global Port Range	The Global Port Range will be mapped to host the device beginning at the base host
	port. The port range that is provided by the service that you are customizing.
	Acceptable values for Global Port Range are 1 to 65535, and the first port must be
	less than or equal to the second port.
Base Host Port	The port on the WAN that will host the NAT service selected. Acceptable values for
	Base Host Port are 0 to 65535, and the first port must be less than or equal to the
	second port.
Protocol	The type of Protocol that is used to run this NAT service.
	TCP- Transmission Control Protocol.
	UDP-User Datagram Protocol (UDP).

Port Forwarding Trigger Ports

To select Port Forwarding Trigger Ports, click on define custom service from the Service Configuration screen and then select Trigger Ports from the Custom Service screen. Click on next. The follow settings will be displayed in the Trigger Ports screen. Enter your values in the Local ‘Trigger’ Port Range fields and click on next to continue.

Service Name	The NAT service you selected.
Local Trigger Port Range	The local LAN side TCP/UDP port. Acceptable values for Local Trigger Port Range
	are 1 to 65535, and the first port must be less than or equal to the second port.
Global Port Range	The WAN side TCP/UDP port range. Acceptable values for Global Port Range are
	1 to 65535, and the first port must be less than or equal to the second port.

030-300198 Rev. D 73 March 2003