Westell Technologies 2100 manual User Guide

User Guide WireSpeed Dual Connect NAT Router

If you clicked on OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device screen will allow you to select which device will host the NAT service you selected on your local area network. Select the device from the Host Device pull-down arrow and click on done.

NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to your profile, you must first select the new NAT service. Next, load the new NAT Configuration, as explained earlier in this section.

Once you have selected a NAT service and you have saved it to your NAT profile, the screen below will be displayed. It shows which NAT service is active for the selected profile.

030-300198 Rev. D 66 March 2003