Westell Technologies 2100 manual Adding Local Trigger Ports, Static NAT

User Guide WireSpeed Dual Connect NAT Router

Adding Local Trigger Ports

If you made changes in the Local ‘Trigger’ Port Range screen and clicked next, the following screen will be displayed. You may either click on close to accept the changes, or click on add to go back to the Trigger Ports screen, enter additional port range values, and click on next. You can repeat this step for each port range that you want to add (up to 10 trigger ports). When you are finished adding ports to the Local ‘Trigger” Port Range, you must click on close to accept the information you have entered and to return to the Service Configuration screen.

Static NAT

To configure your Router for Static NAT, select Service Configuration from the Configuration menu.

NOTE: Static NAT will allow you to configure your Router to work with the special NAT services. Only the Router’s default account profile can be enabled or disabled for a Static NAT.

030-300198 Rev. D 74 March 2003