Maxon Telecom MM-6280IND SMS low battery voltage set point AT$$LOWBATTVTG, TE2 MT2 $$LOWBATTVTG?

Page 23

5.3.1.1.SMS low battery voltage set point (AT$$LOWBATT_VTG)

This command also sets the SMS Auto Voltage Alert value. (For remote user SMS notification activation please see SMS Auto Voltage Alert).

Table 5-28 Read command

 

Command

 

TE2

Æ

MT2

$$LOWBATT_VTG?

 

Response

 

TE2

Å

MT2

$$LOWBATT_VTG: <value1>

 

 

 

610: Default – voltage point set for $$LOWBATT 1 notification

 

 

 

xxxx: 4 digit number representing voltage to 2 decimal points x100 (i.e. 12.8

 

Value1

 

volts would be represented as 1280, 9VDC would be 0900)

 

 

 

 

 

 

 

Value range is from 0910 to 3600.

E: If the first digit entered is a zero it is ignored in the response.

Table 5-29 Set command

 

Command

 

 

TE2

Æ

 

 

MT2

 

$$LOWBATT_VTG=<value>

 

Response

 

 

TE2

Å

 

 

MT2

 

$$LOWBATT_VTG: <value>

 

 

 

 

 

 

<result_code> (OK ERROR)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.3.1.2.Low battery notification (AT$$LOWBATT)

Table 5-30 Notification command

Notify

TE2

Å

MT2

$$LOWBATT: <value>

 

 

 

 

 

0:normal state (voltage above 9.1VDC or that set by $$LOWBATT_VTG)

Value 1: Low Battery (voltage has dropped to the point set at $$LOWBATT_VTG)

2:Power-off sequence initiated - battery voltage has reached 5.8VDC

NOTE: When the power supply to MT2 reaches 9.1 volts the modem will power up and send a $$LOWBATT 1 notification to TE2. It does not send SMS alert at this time. SMS alert is automatically reinstated once the voltage exceeds the $$LOWBATT 1 set point PLUS 10% as seen by the modem.

The following shows MT2’s responses against the battery level.

Table 5-31 Responses

Battery Level MT2

 

 

 

a) Notifies TE2 with AT:

$$LOWBATT:1

 

Batt level=1

 

b) Notifies local user:

buzzer

 

 

(repetition approx every 2 minutes)

 

 

 

 

 

 

c) Notifies with MO SMS if enabled

 

Batt level=2

 

Transmits $$LOWBATT:2 to TE2

 

 

Executes MT2 power-down sequence

 

 

 

 

 

 

 

 

NOTE: Tolerance of voltage readings is +/-0.4V on average.

NOTE: Modem will auto power up once supply voltage reaches 6.5VDC.

Extended AT Commands Manual

Page 23 of 70

2009-06-25

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Extended AT Commands Manual Potentially Unsafe Areas RF Exposure ComplianceRevision History Contact Information TA BLE of Contents 1.3 2.1 Carrier Command Options General Description OverviewTerms TE2 PstnRCE SMSPin out AT Inte Rface DescriptionBasic Integration Serial InterfaceMessage Naming Convention Command FormatTE2 MT2 Basic Interface ConfigurationBaud Rate Set-up USB InterfaceTE2 MT2 $$NOTIFCNT? IO FunctionsAT Notification Options TE2 MT2 $$IOFUNCTION?$$NOTIFCNT 1 0 Success Failure Set command Command$$NOTIFCNT=value MT Data Signal InformationMT SMS Lock order Boot alertInterface Environment MT2 Basic Operational StatePower Reset AT$$RESET 1.4. TE2 active command AT$$TE2ALIVESoftware version AT$$SWVER Power Conservation CommandsSleep mode control AT$$SLEEPENABLE Current time AT$$TIMEExtended AT Commands Manual 2009-06-25 TE2 MT2 $$EXTLED? Low Battery Voltage Notification1.3. RS232C Transceiver power-down control AT$$RS232PWRDOWN LED control AT$$EXTLEDTE2 MT2 $$LOWBATTVTG? SMS low battery voltage set point AT$$LOWBATTVTGLow battery notification AT$$LOWBATT Ringer melody selection AT$$RINGIDX Receiving notification mode option AT$$RCVMODERinger volume control AT$$RINGLVL Visual/Audible Call Alert OptionsAntenna Signal Level AT$$ANTLVL Network Relational SettingsRoaming indicator information AT$$ROAMIND Antenna Signal Level report schedule AT$$ANTSETReading MT2 state AT$$CURRSTATE Modem scheduled Information AT$$PingRssi inquiry AT$$RSSI TE2 MT2 $$LOCATION? RF information AT$$RFINFOLocation information AT$$LOCATION Rssi LED response AT$$RSSILEVEL Diagnostic CommandsRing test AT$$DIAGRING LED test AT$$DIAGLEDTX/DTR Led DescriptionCRT PKTMO data call Data Call SET UPData Calls Call released or failed Uses DTR pinPreferred Message Storage +CPMS General Configuration CommandsSelect Message Service +CSMS +CSMS action command syntaxMessage Format +CMGF Message Service Failure Result Code +CMS ErrorInformative Examples Message Configuration CommandsService Centre Address +CSCA Show Text Mode Parameters +CSDH Set Text Mode Parameters +CSMPNew Message Indications to TE +CNMI Message Receiving and Reading commandsAlpha,scts,tooa,fo,pid,dcs,sca,tosca List Messages +CMGL Read Message +CMGR If text mode +CMGF=1, command successful and SMS-DELIVERIf text mode +CMGF=1, command successful and SMS-SUBMIT Report New Message Acknowledgement to ME/TA +CNMASend Message +CMGS Message Sending and Writing CommandsIf sending fails If text mode +CMGF=1 If text mode +CMGF=1 and sendingSend Message from Storage +CMSS SuccessfulWrite Message to Memory +CMGW Send Message Telstra SMS MO AT+MMCDelete Message +CMGD Send Command +CMGCAT+CNMI? More Messages to Send +CMMSAT+CMSS=7 TE2 MT2 $$SMSOPT? SMS Send and Receive OptionsSMS Mail Notification Option SMSOPT=AB SMS Format send and receiveAT$$SMSOPTIllustrative example SMS Mail Notification Option SMSOPT=1SMS Mail Notification Option SMSOPT=2 SMS Mail Notification Option SMSOPT=3SMS Notification $$SMSNOTIF Auto delete Messages in ME MemorySMS Notifications Auto Delete Messages in ME memory$$AUTODLTSMSTE2 MT2 $$SITENAME? SMS Auto Voltage AlertAuto Voltage Alert SMS Site Name AT$$SITENAME SMS $$LOWBATT 1 set point AT$$LOWBATTVTGSMS Remote Report Request Site Name AT$$REMOTECTRL SMS Remote Report RequestsSMS $$LOWBATT 1 set recipient number AT$$AUTOSMS 10.1.2.4 Rssi request Read ALL requestVbatt request Debug Screen request Location requestSwver request Value Modem will reset Remote Reset73 Read command Enter directory number of specific MT2 Enter message maxon.reset not case sensitiveNVM vs . US ER PR Ofile Storage Command User Remarks ProfileUser Profile store AT&Wn TIA/EIA/IS 707A AT Command SETTE2 MT2 OK Error User modified profiles & NVM changesIII Basic AT CommandsBasic AT Parameters STUBasic S registers Basic action command set Extended AT Commands Manual 2009-06-25 Basic result codes Extended AT Command SetsExtended AT configuration command set +GMR +GCAP+GMI +GMM+ICF 8Data 1Stop DefaultSpace Default +IFC Circuit 133 Ready for Receiving DefaultCircuit 106 Clear to Send/Ready for Sending Default +IPR 115200bps. DefaultTE2 MT2 $$NOTIDS 13.1.1. RM3 AT$$NOTIDSTE2 MT2 $$NOTIDS? +CBC? Cellular Extended AT Command SETCellular AT parameter commands +CDS+CGMR Cellular identification AT command extensions+CGMI +CGMMCellular result codes for Asynchronous data services DM Comman D Diagnostic Mode TE2 MT2 $$DBGSCRN Carrier Command OptionsDebug screen AT$$DBGSCRN
Related manuals
Manual 60 pages 51.94 Kb

MM-6280IND specifications

The Maxon Telecom MM-6280IND is a robust and versatile two-way radio designed to meet the demanding needs of professionals in various fields, including security, construction, and transportation. This model stands out for its combination of advanced features, reliable performance, and user-friendly interface, making it a preferred choice for organizations requiring efficient communication solutions.

One of the key features of the MM-6280IND is its long battery life. Equipped with a high-capacity lithium-ion battery, this radio can provide extended operational time, ensuring that users can stay connected throughout their shifts without frequent recharging interruptions. Additionally, the radio supports multiple battery-saving modes, allowing users to optimize power consumption according to their needs.

The MM-6280IND operates on multiple frequency bands, ensuring compatibility across various communication networks. It supports both analog and digital communication modes, making it adaptable to different environments and user preferences. This dual-mode capability enhances interoperability, allowing seamless communication with other radios, regardless of their technology.

In terms of audio quality, the MM-6280IND features advanced noise-cancellation technology. This ensures clear audio transmission even in noisy environments, such as construction sites or crowded events. Furthermore, the radio is equipped with a built-in speaker and microphone that deliver crisp and loud audio, allowing users to communicate effectively without straining their ears.

Durability is another hallmark of the MM-6280IND. The device is designed to withstand harsh conditions, featuring an IP65 rating for water and dust resistance. This makes it suitable for outdoor use, ensuring that it can function reliably, even in adverse weather conditions. The rugged construction of the radio also protects it from physical impacts, reducing the risk of damage from drops or bumps.

User-friendly functionality is prioritized in the MM-6280IND, with an intuitive keypad and a clear LCD display that make navigation straightforward. It also includes programmable buttons that allow users to customize settings and features according to their specific operational requirements.

Overall, the Maxon Telecom MM-6280IND is a high-performance two-way radio that combines longevity, durability, and adaptability. Its advanced communication technologies and user-focused design make it an excellent tool for professionals seeking efficient and reliable communication solutions in various industries. Whether used for coordinating team efforts or enhancing safety and security, the MM-6280IND is a valuable asset for any organization.
Top Page Image Contents