8 . SMS commands
8.1.1.General Configuration Commands
8.1.1.1.Select Message Service +CSMS
Set command selects messaging service <service>. It returns the types of messages supported by the ME: <mt> for mobile terminated messages, <mo> for mobile originated messages and <bm> for broadcast type messages. If chosen service is not supported by the ME (but is supported by the TA), final result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure Result Code for a list of <err> values.
Also read command returns supported message types along the current service setting. Test command returns a list of all services supported by the TA.
Table 1. +CSMS action command syntax
Command |
| Possible response(s) | |
+CSMS=<servi | +CSMS: <mt>,<mo>,<bm> | ||
ce> | +CMS ERROR: <err> | ||
|
| ||
+CSMS? | +CSMS: <service>,<mt>,<mo>,<bm> | ||
|
| ||
+CSMS=? | +CSMS: (list of supported <service>s) | ||
|
| ||
| <service> | ||
| 0 | : 3GPP TS 23.040 and 3GPP TS 23.041 | |
| 1 | : | |
|
| ||
| <mt> | ||
| 0 | : type not support | |
Value | 1 | : type support | |
|
| ||
<mo> | |||
| |||
| 0 | : type not support | |
| 1 | : type support | |
|
| ||
| <bm> | ||
| 0 | : type not support | |
| 1 | : type support | |
|
|
|
8.1.1.2.Preferred Message Storage +CPMS
Set command selects memory storages <mem1>, <mem2> and <mem3> to be used for reading, writing, etc. If chosen storage is not appropriate for the ME (but is supported by the TA), final result code +CMS ERROR: <err> shall be returned. See chapter Message Service Failure Result Code for a list of possible <err> values.
Test command returns lists of memory storages supported by the TA.
Extended AT Commands Manual | Page 31 of 70 |