Technics MT5634SMI-92, MT5634SMI-34 manual Escape AT Commands

Chapter 5 – AT Commands, S-Registers, and Result Codes

Command:	#CBRy Callback Security Reset
Values:	y = 0–29
Default:	None
Description:	Clears the password and phone number in the y memory location.

Command:	#CBSn Callback Enable/Disable
Values:	n = 0, 1, 2, or 3
Default:	0
Description:	#CBS0	Disables callback security.
	#CBS1	Enables local and remote callback security.
	#CBS2	Enables remote callback security only.
	#CBS3	Disables callback security until local hangup or reset.

Command:	#Pn	Set 11-bit Parity
Values:		n = 0 or 1
Default:		2
Description:		#P0	No parity.
		#P1	Odd parity.
		#P2	Even parity.

Command:	#Sx	Enter Setup Password
Values:		x= password (1–8 characters, case sensitive)
Default:		MTSMODEM
Description:		Enters the remote configuration setup password.

Command:	#S=x Store Setup Password
Values:	x= password (1–8 characters, case sensitive)
Default:	MTSMODEM
Description:	Stores a new remote configuration setup password.
Escape AT Commands

Command:	+++AT<CR> Escape Sequence
Values:	n/a
Description:	Puts the modem in command mode (and optionally issues a command) while remaining
	online. Type +++AT and up to two optional command characters; then press ENTER. Used
	mostly to issue the hang-up command: +++ATH<CR>.
Command:	%%%AT<CR> Remote Configuration Escape Sequence
Values:	n/a
Description:	Initiates remote configuration mode while online with remote modem. The remote
	configuration escape character (%) is defined in register S13.

SocketModem Global MT5634SMI Developer’s Guide 34