RAD Data comm operation manual Turning Off RIC-155, Navigating Tables, Logging Out

RIC-155Installation and Operation Manual Chapter 3 Operation

Navigating Tables

Some of the RIC-155 management software screens are tables, which are bigger than regular menus and require scrolling to navigate between parameters. For example, the Inventory screen or Manager List menu are considered tables.

Use the following keys (case-sensitive) for tables navigation:

•Ctrl L – scroll left, Left Arrow – move left,

•Ctrl R – scroll right, Right Arrow – move right

• Ctrl U – scroll up, Up Arrow – move up

•Ctrl D – scroll down, Down Arrow – move down

•<Tab> – select next changeable cell

•G<row number>, <col number> - go to cell.

Note You can display these navigation keys by typing <?> from a table.

Logging Out

To end the current session:

•In the Main menu, click Logout.

Note RIC-155 allows up to three management sessions to be active at a time. If a Web-based management session was not ended properly, (for example, by closing the Web browser window instead of logging out), you have to wait five minutes before attempting the next log-in. If you try to log in during the five-minute security timeout, RIC-155 does not allow you to proceed to the Main menu, displaying ‘Too Many Users’ warning.

3.6Turning Off RIC-155

To turn off RIC-155:

•Remove the power cord from the power source.

Turning Off RIC-155 3-9