RAD Data comm RIC-155 Configuring the Network Managers, To configure the network managers

Chapter 4 Configuration			RIC-155Installation and Operation Manual
	Host IP		RIC-155
			>
	1.	Host IP List
	2.	Host default gateway	(0.0.0.0)
	3.	Read community	(public)
	4.	Write community	(public)
	5.	Trap community	(public)
	6.	Host Tagging	(Tagged)
	7.	VLAN ID [1-4094]	(1)
	8.	Host VLAN priority	(1)
	>
	ESC-prev.menu; !-main menu; &-exit
		Figure 4-4. Host IP Menu
	Host IP List		RIC-155
			(0.0.0.0)
	1.	IP Address
	2.	IP Mask	(0.0.0.0)>
	ESC-prev.menu; !-main menu; &-exit

Figure 4-5. Host IP List Menu

Configuring the Network Managers

Define or modify the network management stations to which the SNMP agent of RIC-155 sends traps. Up to ten managers can be defined. Entering the IP address and corresponding subnet mask defines each management station. In addition, you can temporarily prevent a manager station from receiving traps by masking them.

To configure the network managers:

1.Follow the path: Configuration > System Configuration > Management > Manager List.

The Manager List menu appears (see Figure 4-6).

2.From the Manager List menu, select a management station by moving the cursor up/down or left/right.

3.Enter a new IP address for the selected management station.

4.Move to the Trap Mask field and toggle between YES and NO to mask or unmask traps for the selected management station.

5.Repeat step 2 and step 3 to define additional management stations.

4-4 Configuring RIC-155 for Management