Adjustments (Normal mode)
Adjusting the picture
centering
2For vertical adjustment
Press the ¬ ./>buttons.
The adjustment data becomes the individual setting for each input signal received.
1Press the CENT button.
The “CENTER” OSD appears.
CENT
CENTER
2 3 | 10 |
2For vertical adjustment
Press the ¬ ./>buttons.
.. . . to move down >. . . to move up
For horizontal adjustment
Press the > ?//buttons.
?. . . to move left /. . . to move right
The OSD automatically disappears after about 10 seconds. To turn off the OSD, press the CENT button again.
To reset, press the RESET button while the OSD is on. The horizontal and vertical centerings are both reset.
Adjusting the picture size
The adjustment data becomes the individual setting for each input signal received.
1Press the SIZE button.
The “SIZE” OSD appears.
SIZE
S I ZE
2 3 | 10 |
10
.. . . to decrease >. . . to increase
For horizontal adjustment
Press the > ?//buttons.
?. . . to decrease /. . . to increase
The OSD automatically disappears after about 10 seconds. To turn off the OSD, press the SIZE button again.
To reset, press the RESET button while the OSD is on. The horizontal and vertical sizes are both reset.
Adjusting the picture rotation
The adjustment data becomes the common setting for all input signals received.
1Press the GEOM button.
The “GEOMETRY” OSD appears.
GEOM
GEOMETRY
2 3 | 10 |
2Press the ¬./>buttons.
.. . . to rotate counterclockwise >. . . to rotate clockwise
The OSD automatically disappears after about 10 seconds. To turn off the OSD, press the GEOM button again.
To reset, press the RESET button while the OSD is on. The picture rotation and the pincushion settings are both reset.