Sony SX-215 user manual User’s Guide Information for European Users SX-200

Page 35

User’s Guide

Information for European Users: SX-200

The SX-200 print server is in compliance with the Class B Information Technology Equipment requirements and other relevant provisions of European Directive 1999/5/EC. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communications devices. The internal function is a radio device using the 2.4 GHz frequency band (2.400GHz - 2.4845 GHz) and 5. GHz frequency band ( 5.150GHz - 5.825GHz). It is intended for wireless communication with other 802.11a, 802.11b, and 802.11g-enabled devices in an indoor environment.

The use of 802.11a, 802.11b, and 802.11g wireless technology in certain countries may be restricted. Before using 802.11x products, please confirm with the frequency management authority in the country where you plan to use it. Many countries allow indoor use only. In Italy, general authorization is required if used outside. In France, the use of certain channels is restricted outdoors. In some situations or environments, the use of 802.11x wireless technology might be restricted by the proprietor of the building or responsible representatives of the organization, for example, in airplanes, in hospitals or in any other environment where the risk of interference with other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies to the use in a specific organization or environment, you are encouraged to ask for authorization to use 802.11x wireless technology prior to switching it on. Consult your physician or the manufacturer of personal medical devices (pacemakers, hearing aids, etc.) regarding any restrictions on the use of 802.11x wireless technology.

Silex cannot be responsible for any failure to satisfy the protection requirements resulting from a non- recommended modification of the product.

Declaration of Conformity (CE): SX-200

Manufacturer: Silex Technology America, Inc. 157 West 7065 South

Salt Lake City, UT 84047, USA Telephone: (801) 748-1199

Product: Ethernet print server

Model No.: SX-200 Series

Silex technology america, Inc., Inc. hereby declares that the above-referenced product, to which this declaration relates, in is conformity with the provisions of:

Council Directives 1999/5/EC (March 9, 1999), Radio Equipment and Telecommunications Terminal Equipment.

Standards used and met in the assessment:

∙EN301 489-1 (V1.5.1, 2004-11)

∙EN301 489-17 (V1.2.1, 2002-08)

∙EN300 328 (V1.5.1, 2004-08)

∙EN60950

The documents required by this Directive are maintained at the corporate headquarters of Silex Technology America, Inc., 157 West 7065 South, Salt Lake City, UT 84047, USA

Document #40181-420 Rev. B

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents User’s Guide SX-200/SX-215User’s Guide User’s Guide SET Port P1 Sojbusy SET IP TCP SH Smtp Product Overview Introduction Package ContentsOther Operating System Requirements User’s Guide About This User’s GuideWindows System Requirements User’s Guide Wireless Print Server Requirements User’s Guide Print Server Components Label Color State Status LED IndicatorsPushbutton Functions Factory Default SettingsDefault Settings wired and wireless print servers Wireless Default Settings wireless print servers onlyBefore You Begin Hardware InstallationUser’s Guide User’s Guide Verifying the Connection to the Printer Web Browser Interface Configuration and ManagementConfiguration Options ExtendView UtilityConfiguration Console HP Web JetAdmin UtilityDocument #40181-420 Rev. B User’s Guide Telnet Adding the Standard TCP/IP Port User’s Guide Windows Print Queue ConfigurationSelect the local printer, as shown below, and click Next User’s Guide User’s Guide Macintosh Print Queue Configuration Configuring to Print Using TCP/IP OS Introduction TroubleshootingPrinting Problems Checking the Network Connection and Cabling Troubleshooting Windows ProblemsUser’s Guide Troubleshooting Network Configuration Problems User’s Guide Troubleshooting Wireless Configuration Problems Where to Get Help User’s Guide Returning Products Information for United States Users SX-200 Appendix a Safety and Regulatory NoticesInformation for Canadian Users IC notice SX-200 User’s Guide Declaration of Conformity FCC SX-200Declaration of Conformity CE SX-200 User’s Guide Information for European Users SX-200Information for Canadian Users IC Notice SX-215 User’s Guide Declaration of Conformity FCC SX-215User’s Guide Appendix B Updating Firmware User’s Guide User’s Guide Loading New Firmware Macintosh OS-X Serial Port Command Console Access User’s Guide Command console access informationTelnet Command Console Access SET NW ENC Network CommandsSH NW SH NW AuthSET NW Keyval SH NW ModeSH NW ENC SET NW KEY#SH NW Speed CL NW BSsid SET NW CERTCN2 SH NW StatsSET NW Certcn SH NW CertcnSET NW Certkey SH NW CERTCN2SET NW Certexp SH NW CertexpSET NW Realm SET NW PWSET NW Inap SH NW InapSET NW Iroam SH NW WpagroupSET NW Wpapsk SET NW WpatraceSET NW REGDOMain SH NW IroamSET NW DFS SH NW DFSSets Ethernet Speed to 10baseT, 100baseTX, or Autosense Port CommandsSET NW Wired SH NW REGDOMainUser’s Guide Shows Port parameters Sample output User’s Guide Parallel Port CommandsEnable or disable bidirectional mode SET Port P1 BIDirCL Port port JOB SET Port P1 Nbuf ENable DIsableEnable or disable PJL status initialization SET SERVEr NAme Server Information CommandsUSB Port Commands SET SERVEr DEscriptionSH Serial SET Snmp SETCOMM1SET Snmp SETCOMM2 SH VErsion User’s Guide SH SERVErSH SERVEr COunters SH SnmpSET Servi service name FIlter Service CommandsSET Servi service name BOT SET Servi service name EOTSET Servi service name NAme SET Servi service name FMSSET Servi service name FRS SET Servi service name IPSET Servi service name TCP User’s Guide SET Servi service name PRIoritySH Servi PRI servicenum SET Servi service name RECeiveTCP/IP Commands String CommandsSET IP RANge User’s Guide SET IP ACcessSH IP ACcess SET IP ARP ENableSET IP Http SET IP ChksumSET IP FTP SET IP LPD SET IP Tftp SET IP TCPShows TCP/IP related Parameters Sample output SH IPFirmware Update User’s Guide SH LOAd Shows the firmware update parameters Sample outputSH Free Other CommandsSET Default ExitSave SET PoweronSH Poweron InitUnprotect Netware CommandsSET Netw SErver User’s Guide SET Netw POllingSET Netw QServer SET Netw REscanEmail Printing Commands SET Smtp ADdress SET POP3 PAsswordSET POP3 TImeout SET Smtp ENableSH POP3 DLC / Netbeui CommandsSET DLC ENable SET DLC TIMeoutSH DLC Appletalk CommandsSET APPletalk ZOne Configures the Appletalk Zone for this serverExtendView Wireless Security ConfigurationKey Selection SH NW SET NW KEY# SH NW Speed SET NW Certcn SH NW Certexp SH NW Inap SET NW Wpapsk
Top Page Image Contents