![](/images/new-backgrounds/1179887/179887171x1.webp)
User’s Guide
Sets EAP
SET NW INAP [PAPMSCHAP_V2] (default = PAP)
SH NW INAP
Shows the selected inner authentication mode
sample output: Authentication protocol = PAP
Note: the deprecated command SH NW TTAP will also return this information.
SET NW REALM
Sets the realm portion of the 802.1x EAP authentication ID This may also be set with the ID command.
SET NW REALM <realm> (default = <null>)
SH NW REALM
Shows the realm associated with the authentication ID, if any.
sample output: somewhere
Note: The default realm is a null (blank) string
Note: The deprecated command SH NW TTRE will also return this information.
SET NW WPAGROUP
Enable or disable WPA/WPA2 group key mode. If enabled, this allows group keys to be used for data link encryption.
SET NW WPAGROUP [ENABLE DISABLE] (default = disabled)
SH NW WPAGROUP
Shows the state of the allow WPA/WPA2 group keys flag
sample output:
Document | 86 |