Sony SX-215 User’s Guide SH Servi FILters, SET Servi service name FMS, SET Servi service name FRS

User’s Guide

SH SERVI FILters

Shows filter settings
sample output:
#	Service Name	Filter
1	SLX_FFFFFF	0: No Filter
2	BINARY_P1	0: No Filter
3	TEXT_P1	1: Text Substitution m= LF, r=
CRLF
4	SLXFFFFFF_P1_4	0: No Filter
5	SLXFFFFFF_P1_5	0: No Filter
6	SLXFFFFFF_P1_AT	4: PostScript Tagged Binary

SET SERVI <service name> FMS

Set filter 1 (text replacement filter) match string index. If the index is zero, the default string of <LF> (line feed) is used.

SET SERVI <service name> FRM nn (default = 0 )

SET SERVI <service name> FRS

Set filter 1 (text replacement filter) replace string index. If the index is zero, the default string of <CRLF> (carriage return-line feed) is used.

SET SERVI <service name> FRS nn (default = 0 )

SET SERVI <service name> IP

Enable or disable all IP based jobs (lpd, raw tcp, ftp, etc.) on the service.

SET SERVI <service name> IP [ENable DIsable]

(default = enabled for service 1 and 2, disabled for all others)

SET SERVI <service name> NAme

Change the service name

SET SERVI <service name> NAme <newname> (default varies by service)

SET SERVI <service name> POrt

Set the output port associated with a service.
SET SERVI <service name> POrt	<portname>
(default = “S1”)
Document #40181-420 Rev. B	60