Spectra Logic RXT150 manual 8The ESD screw Silver media shown

Chapter 3. Troubleshooting RXT Media

4.Use a #2 Phillips screwdriver to loosen the ESD resistor screw on the side of the disk drive (Figure 3-8).

Figure 3-8The ESD screw (Silver media shown).

On Green RXT media, you may get to skip this step. See Figure 3-9.

If you are replacing a disk drive on this end, you do not need to remove an ESD screw; it is only present on the other drive.

If you are replacing a disk drive on this end, you need to remove the ESD screw.

Display

Pogo Pad

Figure 3-9Green RXT media.

28