Chapter 3. Troubleshooting RXT Media
Replacing a Disk Drive in Gold RXT Media
Use this process to replace a
1.Remove the two screws on the side panel of the RXT media (Figure
Figure 3-19 The two side panel screws.
2.Slide the side panel out.
3.Locate the failed disk drive, which is labeled with the serial number you wrote down from the Get RXT Media Pack Drive Status Diagnostic screen (Figure
4.Pull the disk drive out by its tab (Figure
o
Figure 3-20 Pulling out the failed disk drive.
5.Replace the failed disk drive with the new disk drive.
34