|
|
|
| Chapter 2: Quick Start | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Source Disk |
|
|
| Channel: | Drive ID | Drive Model | Capacity (MB) |
|
|
|
| Target Disk |
|
|
| Channel: | Drive ID | Drive Model | Capacity (MB) |
|
|
| [Please Select A Source Disk] |
|
| |
| Channel: Drive ID | Drive Model | Capacity (MB) |
| |
| 1 : | 1 | QUANTUMCR8.4A | 8063 |
|
| 3 : | 3 | QUANTUMCR8.4A | 8063 |
|
|
| [↑ ] Up [↓ ] [ESC] Exit |
| ||
|
|
|
|
|
|
4.Press the arrow keys to choose which drive contains the existing data to be copied.
5.Press
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6.Select Y to continue. If you choose N, you will be returned to step 1.
7.Once complete, the following screen will appear confirming that your Security array has been created. Press any key to reboot the system.
Array has been created. <Press Any Key to Reboot>
8.Proceed to Chapter 4: Installing Drivers to install the FastTrak TX4000 driver and/or operating system.
13