Promise Technology TX4000 user manual Quick Start

Chapter 2: Quick Start

When you receive the FastTrak TX4000 Series Controller Card, the package should contain the items listed below:

•FastTrak TX4000 Ultra ATA/133 RAID Controller Card

•Quick Start Guide

•FastTrak TX4000 driver diskette

•Two Y-cable power splitters.

•Four internal 80-wire/40-pin Ultra ATA/133 hard drive cables (18 inches or 45 cm in length)

•CD with Promise Array Management (PAM) utility, PAM User Manual and FastTrak TX4000 User Manual.

If ANY of the contents are missing or appear to be damaged, please contact your dealer or distributor immediately.

Warning

Before installing the adapter into an existing system, backup any important or useful data. Failure to follow this accepted PC practice could result in data loss.

Warning

The FastTrak TX4000 Controller card, like other parts of your system, is subject to damage by static electricity. Be sure that you’re properly grounded (Promise recommends that you wear an anti-static strap or touch a grounded object) and that you unplug your system before installing your FastTrak TX4000 Controller card.

5