Promise Technology TX4000 user manual New Windows Server 2003 Installation

Page 38

FastTrak TX4000 User Manual

New Windows Server 2003 Installation

The following details the installation of the FastTrak TX4000 drivers while installing Windows Server 2003.

1.Start the installation:

•Floppy Install: Boot the computer with the Windows Server 2003 installation diskettes.

•CD-ROM Install: Boot from the CD-ROM. Press F6 after the message “Press F6 if you need to install third party SCSI or RAID driver” appears.

2.When the Windows Server 2003 Setup window is generated, press S to specify an Additional Device(s).

3.Insert the FastTrak TX4000 driver diskette into drive A: and press Enter.

4.Choose Win .NET 2003 Promise FastTrak TX4000/S150 TX Series (tm) Controller from the list that appears on screen, and then press the Enter.

5.Press S to use the driver on the floppy disk and then press Enter to continue with installation.

6.The Windows Server 2003 Setup screen will appear again saying “Setup will load support for the following mass storage devices:” The list will include “Win .NET 2003 Promise FastTrak TX4000/S150 TX Series (tm) Controller”.

NOTE: If there are any additional devices to be installed, specify them now. When all devices are specified, continue to the next step.

7.From the Windows Server 2003 Setup screen, press the Enter. Setup will now load all device files and then continue the Windows Server 2003 installation.

34

Image 38

Contents Fasttrak TX4000 Important Data Protection Information CopyrightTrademarks Contents Page What is the FastTrak TX4000 RAID Card? IntroductionPromise Array Management Utility PAM Keys Features and Benefits Features BenefitsCompatibility Quick Start Installing the FastTrak TX4000 Card Insert the FastTrak TX4000 card into an open PCI slotInstalling the Hard Drives IDE Creating Your Disk Array Creating an Array for Performance Creating a Security Array with New Drives Creating a Security Array with an Existing Data Drive QUANTUMCR8.4A Page Using FastBuild Configuration Utility Viewing FastTrak TX4000 Bios ScreenNavigating the FastBuild Setup Menu Using the Main MenuCreating Arrays Automatically Performance Optimize Array forDefining Typical Application Usage SecurityUsing a Hot Spare Drive Creating Multiple Disk ArraysViewing Drive Assignments Manually Creating an Array Selecting Array Type Selecting Stripe BlockGigabyte Boundary Assigning Drives to ArrayCreating a Mirrored Array Using New Drives Adding Fault Tolerance to an Existing Drive Source Disk Channel Drive ID Drive Model Capacity MB Making a FastTrak TX4000 Disk Array Bootable How FastTrak TX4000 Saves Array Information Creating a Hot Spare Drive for Mirrored ArraysHow FastTrak TX4000 Orders Arrays Deleting an Array QUANTUMCR8.4A Rebuilding a Mirrored Array QUANTUMCR8.4A Installing Software Drivers Procedure NumberNew Windows Server 2003 Installation Existing Windows Server 2003 Installation Confirming Windows Server 2003 Driver InstallationNew Windows XP Installation Existing Windows XP Installation Confirming Windows XP Driver InstallationNew Windows 2000 Installation Confirming Windows 2000 Driver Installation Existing WindowsNew Windows ME Installation Existing Windows ME Installation Confirming Driver Installation in Windows MENew Windows NT4.x Installation Existing Windows NT4.x Installation Removing the Driver from Windows NT4.xNew Windows 98 Installation Existing Windows 98 Installation Confirming Driver Installation in WindowsPage Disk Array Concepts About Adapter BiosFastBuild Auto Menu Setup About FastTrak TX4000Disk Array Description RAID Level Performance Fault Capacity No. Tolerance DrivesDisk Array Terms Disk Array MemberAbout RAID Levels Striping RAIDMirroring RAID Data Mirror Disk DrivesStriping / Mirror RAID 0+1 About Dual Data Redundancy Failed Array Event Drives Status Why?Configuring PCI IRQ resources Troubleshooting & TipsMotherboard Issues System locks up during boot up or when Windows startsIntermittent data problems System Cmos IssuesMiscellaneous problems such as Using an Onboard IDE Card with FastTrak TX4000Drive cannot be formed into an array Drive-Related ErrorsCritical Array Status Error Reported during Boot System Cmos displays C or D drive failure during StartupUnable to partition or format array Cannot Rebuild Mirrored RAID 1 Array Promise Windows driver does not appear in Device Manager Operating System-Related IssuesDifferent drive lettering under Windows NT Troubleshooting & Tips Optimize Array for Performance Re-Configure PCI Latency SettingPerformance Tips Change Setting of PCI Bus Utilization Page Will Acpi work with HDDs on the FastTrak TX4000? Appendix a Frequently Asked QuestionsPre-Installation Can I use Atapi devices on the FastTrak TX4000 controller?RAID 1 Mirror Drive IssuesRAID 0 Stripe RAID 0+1 MirrorHow do I partition/format my FastTrak TX4000 RAID array? Installation Issues Post-InstallationUSA Tech Support Center Technical Support ServicesAppendix B Technical Support China Office European Tech SupportPacific Rim Sales Office Limited Warranty Disclaimer of other warrantiesYour Responsibility Returning Product for Repair