Promise Technology TX4000 user manual New Windows XP Installation

Page 40

FastTrak TX4000 User Manual

New Windows XP Installation

The following details the installation of the FastTrak TX4000 drivers while installing Windows XP.

1.Start the installation:

•Floppy Install: Boot the computer with the Windows XP installation diskettes.

•CD-ROM Install: Boot from the CD-ROM. Press F6 after the message “Press F6 if you need to install third party SCSI or RAID driver” appears.

2.When the Windows XP Text Setup is generated, press S to specify an Additional Device(s).

3.Insert the FastTrak TX4000 driver diskette into drive A: and press Enter.

4.Choose WinXP Promise FastTrak TX4000 Controller from the list that appears on screen, and then press the Enter.

5.Press Enter to continue with installation.

6.The Windows XP Setup screen will appear again saying “Setup will load support for the following mass storage devices:” The list will include WinXP Promise FastTrak TX4000 Controller.

NOTE: If there are any additional devices to be installed, specify them now. When all devices are specified, continue to the next step.

7.From the Windows XP Setup screen, press the Enter. Setup will now load all device files and then continue the Windows XP installation.

36

Image 40

Contents

Fasttrak TX4000 Trademarks CopyrightImportant Data Protection Information Contents Page What is the FastTrak TX4000 RAID Card? IntroductionPromise Array Management Utility PAM Keys Features and Benefits Features BenefitsCompatibility Quick Start Installing the FastTrak TX4000 Card Insert the FastTrak TX4000 card into an open PCI slotInstalling the Hard Drives IDE Creating Your Disk Array Creating an Array for Performance Creating a Security Array with New Drives Creating a Security Array with an Existing Data Drive QUANTUMCR8.4A Page Using FastBuild Configuration Utility Viewing FastTrak TX4000 Bios ScreenNavigating the FastBuild Setup Menu Using the Main MenuCreating Arrays Automatically Optimize Array for Defining Typical Application UsagePerformance SecurityUsing a Hot Spare Drive Creating Multiple Disk ArraysViewing Drive Assignments Manually Creating an Array Selecting Array Type Selecting Stripe BlockGigabyte Boundary Assigning Drives to ArrayCreating a Mirrored Array Using New Drives Adding Fault Tolerance to an Existing Drive Source Disk Channel Drive ID Drive Model Capacity MB Making a FastTrak TX4000 Disk Array Bootable How FastTrak TX4000 Orders Arrays Creating a Hot Spare Drive for Mirrored ArraysHow FastTrak TX4000 Saves Array Information Deleting an Array QUANTUMCR8.4A Rebuilding a Mirrored Array QUANTUMCR8.4A Installing Software Drivers Procedure NumberNew Windows Server 2003 Installation Existing Windows Server 2003 Installation Confirming Windows Server 2003 Driver InstallationNew Windows XP Installation Existing Windows XP Installation Confirming Windows XP Driver InstallationNew Windows 2000 Installation Confirming Windows 2000 Driver Installation Existing WindowsNew Windows ME Installation Existing Windows ME Installation Confirming Driver Installation in Windows MENew Windows NT4.x Installation Existing Windows NT4.x Installation Removing the Driver from Windows NT4.xNew Windows 98 Installation Existing Windows 98 Installation Confirming Driver Installation in WindowsPage About Adapter Bios FastBuild Auto Menu SetupDisk Array Concepts About FastTrak TX4000RAID Level Performance Fault Capacity No. Tolerance Drives Disk Array TermsDisk Array Description Disk Array MemberAbout RAID Levels Striping RAIDMirroring RAID Data Mirror Disk DrivesStriping / Mirror RAID 0+1 About Dual Data Redundancy Failed Array Event Drives Status Why?Troubleshooting & Tips Motherboard IssuesConfiguring PCI IRQ resources System locks up during boot up or when Windows startsSystem Cmos Issues Miscellaneous problems such asIntermittent data problems Using an Onboard IDE Card with FastTrak TX4000Drive-Related Errors Critical Array Status Error Reported during BootDrive cannot be formed into an array System Cmos displays C or D drive failure during StartupUnable to partition or format array Cannot Rebuild Mirrored RAID 1 Array Different drive lettering under Windows NT Operating System-Related IssuesPromise Windows driver does not appear in Device Manager Troubleshooting & Tips Performance Tips Re-Configure PCI Latency SettingOptimize Array for Performance Change Setting of PCI Bus Utilization Page Appendix a Frequently Asked Questions Pre-InstallationWill Acpi work with HDDs on the FastTrak TX4000? Can I use Atapi devices on the FastTrak TX4000 controller?Drive Issues RAID 0 StripeRAID 1 Mirror RAID 0+1 MirrorHow do I partition/format my FastTrak TX4000 RAID array? Installation Issues Post-InstallationAppendix B Technical Support Technical Support ServicesUSA Tech Support Center Pacific Rim Sales Office European Tech SupportChina Office Limited Warranty Disclaimer of other warrantiesYour Responsibility Returning Product for Repair