Promise Technology TX4000 user manual Returning Product for Repair

Page 75

Appendix B: Technical Support

Returning Product for Repair

If you suspect a product is not working properly, or if you have any questions about your product, contact our Technical Support Staff through one of our Technical Services, making sure to provide the following information:

Product model and serial number (required);

Return shipping address;

Daytime phone number;

Description of the problem;

Copy of the original purchase invoice.

The technician will assist you in determining whether the product requires repair. If the product needs repair, the Technical Support Department will issue an RMA (Return Merchandise Authorization) number.

Return only the specific product covered by the warranty (do not ship cables, manuals, diskettes, etc.), with a copy of your proof of purchase to:

USA and Canada:

Promise Technology, Inc.

 

Customer Service Dept.

 

Attn.: RMA # ______

 

1745 McCandless Drive

 

Milpitas, CA 95035

Other Countries:

Return the product to your dealer or retailer.

 

Contact them for instructions before shipping

 

the product.

You must follow the packaging guidelines for returning products:

Use the original shipping carton and packaging or similar packaging if the original is not available

Include a summary of the product’s problem(s)

Write an attention line on the box with the RMA number

Include a copy of proof of purchase

You are responsible for the cost of insurance and shipment of the product to Promise. Note that damage incurred due to improper transport or packaging is not covered under the Limited Warranty.

When repairing returned product(s), Promise may replace defective parts with new or reconditioned parts, or replace the entire unit with a new or reconditioned unit. In the event of a replacement, the replacement unit will be under warranty for the remainder of the original warranty term from purchase date, or 30 days, whichever is longer.

Promise will pay for standard return shipping charges only. You will be required to pay for any additional shipping options (such as express shipping).

71

Image 75
Contents Fasttrak TX4000 Copyright TrademarksImportant Data Protection Information Contents Page Introduction What is the FastTrak TX4000 RAID Card?Promise Array Management Utility PAM Features Benefits Keys Features and BenefitsCompatibility Quick Start Insert the FastTrak TX4000 card into an open PCI slot Installing the FastTrak TX4000 CardInstalling the Hard Drives IDE Creating Your Disk Array Creating an Array for Performance Creating a Security Array with New Drives Creating a Security Array with an Existing Data Drive QUANTUMCR8.4A Page Viewing FastTrak TX4000 Bios Screen Using FastBuild Configuration UtilityUsing the Main Menu Navigating the FastBuild Setup MenuCreating Arrays Automatically Security Optimize Array forDefining Typical Application Usage PerformanceCreating Multiple Disk Arrays Using a Hot Spare DriveViewing Drive Assignments Manually Creating an Array Selecting Stripe Block Selecting Array TypeAssigning Drives to Array Gigabyte BoundaryCreating a Mirrored Array Using New Drives Adding Fault Tolerance to an Existing Drive Source Disk Channel Drive ID Drive Model Capacity MB Making a FastTrak TX4000 Disk Array Bootable Creating a Hot Spare Drive for Mirrored Arrays How FastTrak TX4000 Orders ArraysHow FastTrak TX4000 Saves Array Information Deleting an Array QUANTUMCR8.4A Rebuilding a Mirrored Array QUANTUMCR8.4A Procedure Number Installing Software DriversNew Windows Server 2003 Installation Confirming Windows Server 2003 Driver Installation Existing Windows Server 2003 InstallationNew Windows XP Installation Confirming Windows XP Driver Installation Existing Windows XP InstallationNew Windows 2000 Installation Existing Windows Confirming Windows 2000 Driver InstallationNew Windows ME Installation Confirming Driver Installation in Windows ME Existing Windows ME InstallationNew Windows NT4.x Installation Removing the Driver from Windows NT4.x Existing Windows NT4.x InstallationNew Windows 98 Installation Confirming Driver Installation in Windows Existing Windows 98 InstallationPage About FastTrak TX4000 About Adapter BiosFastBuild Auto Menu Setup Disk Array ConceptsDisk Array Member RAID Level Performance Fault Capacity No. Tolerance DrivesDisk Array Terms Disk Array DescriptionStriping RAID About RAID LevelsData Mirror Disk Drives Mirroring RAIDStriping / Mirror RAID 0+1 Failed Array Event Drives Status Why? About Dual Data RedundancySystem locks up during boot up or when Windows starts Troubleshooting & TipsMotherboard Issues Configuring PCI IRQ resourcesUsing an Onboard IDE Card with FastTrak TX4000 System Cmos IssuesMiscellaneous problems such as Intermittent data problemsSystem Cmos displays C or D drive failure during Startup Drive-Related ErrorsCritical Array Status Error Reported during Boot Drive cannot be formed into an arrayUnable to partition or format array Cannot Rebuild Mirrored RAID 1 Array Operating System-Related Issues Different drive lettering under Windows NTPromise Windows driver does not appear in Device Manager Troubleshooting & Tips Re-Configure PCI Latency Setting Performance TipsOptimize Array for Performance Change Setting of PCI Bus Utilization Page Can I use Atapi devices on the FastTrak TX4000 controller? Appendix a Frequently Asked QuestionsPre-Installation Will Acpi work with HDDs on the FastTrak TX4000?RAID 0+1 Mirror Drive IssuesRAID 0 Stripe RAID 1 MirrorHow do I partition/format my FastTrak TX4000 RAID array? Post-Installation Installation IssuesTechnical Support Services Appendix B Technical SupportUSA Tech Support Center European Tech Support Pacific Rim Sales OfficeChina Office Disclaimer of other warranties Limited WarrantyYour Responsibility Returning Product for Repair