3 SafeCom Controller
3.4.9Enable High Speed Print
1.Open the Advanced Configuration web page (3.3.2).
2.Click Printer and change High Speed Print Enabled should be YES if print data is to be sent directly (and unencrypted) to the device from the SafeCom server rather than through the SafeCom Controller.
3.Click Save and Continue.
4.Click Restart.
Note: If the document is sent encrypted to the device the High Speed Print is ignored.
3.4.10Access Sharp MFP’s System Settings
1.Login at the Sharp MFP as a user with administrator or technician rights in SafeCom.
2.Press the COPY button to get into copy mode.
3.Press the SYSTEM SETTINGS button to access the Sharp MFP’s system settings.
3.4.11Restore factory default
You can either restore settings by holding down the SafeCom Controller's test (3.1.3) button for 8 seconds, or from the SafeCom Controller web interface:
1.Open the Advanced Configuration web page (3.3.2).
2.Click Restore Factory Default.
3.4.12Resend configuration
If a device added in the SafeCom Administrator is not configured correctly, or if the device must be reconfigured to a different server, it is possible to resend the configuration details (Server address and Group name) to the device.
1.Browse to Devices in the SafeCom Administrator.
2.
The configuration details are now sent to the device and the configuration is successful when the message "Server is reconfigured" appears.
Note: The Resend configuration functionality does not work with devices that are SafeCom enabled via the device server.
47 |