Nuance comm D60709-22 manual ∙ Device settings, Card ID code Card or ID code

Page 23

2 SafeCom Go Sharp - Device server

Device settings

o Administrator name: The user name with which the administrator can log in to device.

o Administrator password (mandatory): The device password with which the administrator can log in to device.

o Login method: This determines how users log in. Choose between:

-Auto-sense. Auto-sense maps to Card or Windows if an ID device is connected to the MFP and on devices it maps to Card. Otherwise it maps to ID code. Mapping changes within 10 seconds after the ID device is either connected or disconnection. If it does not change a restart of the device may be required.

-Card

-ID code

-Card or ID code

-Card or Windows: Allows the user to log in by either card or by typing in their Windows credentials and selecting domain from drop-down list.

Note: Identification by card requires connecting a USB ID Device (card reader). The option Card or Windows allows the user to log in by either card or by entering their Windows username, password, and domain. The SafeCom G4 server must be a member of the domain or trusted by the domain.

oDefault domain: Specify the domain to pre-fill the domain for users when logging into a device. If using SafeCom Mobile Pull Print the domain must be specified, as the users are not prompted for domain when logging into a device using a smart phone. If the default

domain is not specified, but the users are required to use domains, they can enter the domain with their username (domain\username).

oIdle timeout: Specifies in seconds when a logged in user is automatically logged out if there's no activity.

oHide domain: Check to allow the users to log in without specifying

the domain.

oEnable post tracking: This is relevant only with SafeCom Tracking.

Refer to SafeCom G4 Administrator’s ManualD60650

oReverse document list: Check to show the latest printed

documents at the top of the document list.

oMask ID code: Check to mask the ID code with asterisk (*) when entered at the device.

Drivers: When Pull Printing, SafeCom compares the driver name embedded in the print job with its list of driver names. If no match is found and if Show fidelity warning is checked in the Server properties in the SafeCom Administrator, the document appears with a question mark [?] in the document list. This way the user is warned that fidelity is low and the document may print incorrectly.

oClick Get All to obtain the list of drivers from the SafeCom Server, or add and delete drivers manually.

D60709-22

23

Image 23
Contents Nuance SafeCom Go Sharp Nuance Communications, Inc Table of Contents Regulatory information Index ∙ SafeCom Device Server IntroductionSafeCom Go Sharp RequirementsSafeCom Go Sharp supported Sharp OSA-enabled MFPs Identification Method SafeCom ID DevicesSafeCom Go Sharp supported SafeCom ID Devices SerialAvailable documentation Sharp device passwordsAbout this manual Document history Introduction Overview SafeCom Go Sharp Device server installationInstallation SafeCom Go Sharp Device serverOutbound on SafeCom Device Server Protocol Inbound on SafeCom Device Server ProtocolAdd SafeCom Server Configure SafeCom Device ServerLogin to SafeCom Device Server Login to SafeCom Device ServerDescription Default Device Server config.iniDevice icons Add device to a SafeCom Device ServerClick the Add device tool button Add device via SafeCom Device ServerAdd device server Start SafeCom Administrator Add device via SafeCom AdministratorAdd device server device SafeCom Go Sharp Device server Now Remote Operating. Please do not turn off the Power Configure device in SafeCom Device Server∙ Device information ∙ Network settingsCard ID code Card or ID code ∙ Device settings∙ Device Properties External Accounting Application SettingsGet the SafeCom Go Sharp software Select login methodEnable Copy SafeCom Go Sharp How toRegister device Enable E-mailControl user access rights Enable SafeCom Mobile Pull PrintConfiguration Field Default value Settings Restore factory defaultUninstall SafeCom Go Sharp IP address / hostname Installation with SafeCom ControllerSafeCom Controller Write down the IP address of the deviceConnect hardware Switch off the power to the deviceClick Broadcast… Add device in SafeCom AdministratorIP address known from Dhcp server Find it via BroadcastingExample mysharp.safecom.eu New Sharp devices Configure the Sharp device web interfaceHttp//ip address/soapsharp/safecom.scx Click Standard Application Settings SafeCom Controller Application Name enter Pull Print Click External Accounting3 Sharp Web Interface old modelsClick Standard Applications Application Name enter Pull Print Advanced Configuration web Configure the SafeCom Controller Web InterfaceLogin to the SafeCom Controller Web Interface SafeCom web Printer Manufacturer should be Sharp SafeCom Go must be YES Copy Idle Timeout is ignoredPrinter web Specify SafeCom Server and device connection Enable copy tracking for ControllerChange Copy Enabled to YES Click Save and Continue SafeCom Go for Controller How toSet password to prevent unauthorized access Select user identification Disable the Test buttonEnable Copy Control Assign a fixed IP address to the SafeCom ControllerClick Restore Factory Default Enable High Speed PrintAccess Sharp MFP’s System Settings Resend configurationOpen the Sharp MFP’s web page and login Sharp device with SafeCom Device Server Using SafeCom Go SharpLogin Main menu Tap Pull Print Pull Print Document listAccount Select billing code CopyEnter PUK code and PIN code Tap PUK code Register card with PUK codeLogout Enter PUK code Tap PUK codeSharp device with SafeCom Controller Control panel LoginLogin with ID code Tap ID code Login with ID code and PIN code Tap ID codeLogin with Windows Tap Documents Copy Servlets TroubleshootingSafeCom Administrator Unable to locate all SafeCom devices SafeCom Help Desk AssistantAt the printer No billing codes available MFP reports Could not access the accounting server…ERROR5000 Processing is in motion Print performance is slowSafeCom reader does not work Device Server Configuration of devices failedRegulatory information Index Page Index D60709-22