Silex technology SX-550 manual Chapter Setting Configuration Parameters, Factory Default Settings

Chapter 6:

Setting Configuration Parameters

The SX-550 module is equipped with a default configuration that works with most serial-to-Ethernet and wireless connections. You can modify the settings to suit your installation requirements.

ExtendView is the recommended method for setting configuration parameters. However, regardless of the method to access the configuration parameters, the method for modifying the parameters is virtually identical.

Factory Default Settings

Table 19 displays the configuration parameter descriptions and settings with the default settings indicated in a separate column.

Table 19 Factory Default Settings

Parameter	Description	Settings	Default Setting
Character	Bits per character	7, 8	8
Flow	Flow control	None, Xon, Xoff,	None
		CTS/RTS
Parity	Parity	None, Even, Odd, Mark,	None
		Space
Speed	Baud rate of bits per second	300, 600,1200, 2400,	9600
		3600, 4800, 7200,	115200 – console
		9600, 14400,19200,
			port default
		38400, 57600, 76800,
		115200, 230400,
		460800, 921600
Stop	Stop bits per character	1, 2	1
Mode	Line mode or serial port protocol	232, 422, 485, 485HD,	232
		Disabled
Ecable	E-cable mode for TCP connections	Enable, Disable	Disable
Ecaddr	E-cable destination IP address	Set by user	N/A
Econn	E-cable connection attempt time	1-255 seconds	30 seconds
	silex		Page 33
	Part Number 40183-101