Silex technology SX-550 manual SET NW Wpagroup Enable Disable

Command	Description
	Sample output:
	SET NW REALM <realm>
SH NW REALM	Shows the realm associated with the authentication ID, if applicable.
	The default value is null (blank) string.
	The deprecated command SH NW TTRE also returns this data.
	Sample output:
	somewhere
SET NW	Enable or disable WPA group key mode.
WPAGROUPSH	If enabled, group keys can be used for data link encryption.
NW WPAAUTO
	The default value is disabled.
	Sample output:
	SET NW WPAGROUP [ENABLE DISABLE]Shows state of WPA auto connect flag
	Sample output:
	WPA-AUTO Enabled
SH NW	Shows state of the allow WPA group keys flag
WPAGROUPSET	Sample output:
NW WPAGROUP	WPA-GROUP DisabledEnable or disable WPA group key mode.
	If enabled, group keys can be used for data link encryption.
	The default value is disabled.
	Sample output:
	SET NW WPAGROUP [ENABLE DISABLE]
SET NW	Sets WPA PSK pass phrase or hex key.
WPAPSKSH NW	This value is only used if the authentication mode is WPA-PSK. The argument to
WPAGROUP
	this command is either a pass phrase of 8 to 63 characters or exactly 64 hex
	characters representing the 256 bit PSK value.
	Sample output:
	SET NW WPAPSK <key>Shows state of the allow WPA group keys flag
	Sample output:
	WPA-GROUP Disabled
SET NW	Sets WPA trace level.
WPATRACESET	This command is for diagnostic purposes only.
NW WPAPSK
	The default value is 0 or disabled.
	Sample output:
	SET NW WPATRACE nnSets WPA PSK pass phrase or hex key.
	This value is only used if the authentication mode is WPA-PSK. The argument to
	this command is either a pass phrase of 8 to 63 characters or exactly 64 hex
	characters representing the 256 bit PSK value.
	Sample output:
	SET NW WPAPSK <key>
Console Commands	silex	Page 61
	Part Number 40183-101