Antenna Connectors
The
For single antenna use, connect to the main antenna connector, as shown in Figure 22 .
For diversity antenna use, connect to both the main and auxiliary connectors.
Figure 22 Main and Auxiliary Antenna Connectors
Table 32 Antenna Connector Types
Parameter | Description |
|
|
Connector Type | SMT |
| (U.FL) |
Connector Size | Maximum height of 2.4 to 2.5 mm |
|
|
Nominal Characteristic Impedance | 50 Ohm |
|
|
Rated Voltage | 60 V AC (rms) |
|
|
Rated Frequency | DC to 6 GHz |
|
|
Contact Resistance | Center: 20 mOhm maximum |
| Outside: 10 mOhm maximum |
Insulation Resistance | 500 MOhm @ 100 VDC minimum |
|
|
Antenna Cable Plug | iPEX 90 degrees plug with right angle |
| receptacle and cable diameter at 1.32 |
| mm |
For the antenna connector, the
Mating plugs are:
Hirose part number:
www.hirose.co.jp
Page 48 | silex | Designing with the |
| Part Number |
|