Parameter
Description
Settings
Default Setting
Ecport
9100 or set by user
9100
Restoring Factory Default Settings
The factory default settings can restored at any time. Simply perform a cold reset by pressing and holding the module push button for more than five seconds.
Modify Basic Settings
To establish communication between the
Changing Serial Settings
The serial settings, such as mode and baud rate or speed for both the
To change serial settings:
1.Using ExtendView, web browser interface or internal command console, click the Output Port tab. The Output Port window displays.
Figure 16 Output Port Tab
2. Click Serial Settings. The Serial Settings window displays.
Page 34 | silex | Setting Configuration Parameters |
| Part Number |
|