Page 25
Chapter 4:
Using the SX-550 WLAN Module
The SX-550 WLAN module provides a dedicated host processor and an industry-leading network protocol stack for connectivity to a traditional wired Ethernet or an 802.11a, b or g wireless local area network.
The module is easy to configure with several management options, including an internal web browser interface and the Windows-based ExtendView configuration utility. In addition, the module’s internal console can be accessed using TELNET or the serial port via a command line interface for sophisticated diagnostics and configuration. It is also compatible with the SNMP MIBs I, II and has a proprietary MIB to allow complete customization and monitoring.
The two circuit boards are 1.8 x 2.4-inch six-layer integrated design using surface-mounted components. The module contains two I/O ports and three status LEDs that can be configured and programmed to meet your functional requirements.
The compact form factor offers three through-holes allowing for flexible mounting options for configurations, such as Ethernet and wireless versions. The Serial Port Emulator software allows for an easy integration with existing PC applications.
A variety of power management options ensure very low power consumption during inactive periods.
Evaluation Module Connections
You can connect the SX-550 Evaluation Daughtercard to your LAN using wireless or wired Ethernet.
Using the Wireless Method
To use wireless method:
1.Verify the Ethernet cable is disconnected from the RJ-45 jack.
2.Connect the power supply plug to the SX-550 Evaluation Daughtercard.
3.Power on the power supply.
When the wireless connection connects with the access point, the yellow and green LEDs on the module light up simultaneously. The lights blink during activity.
4.Continue to the Access silex Console Interface section.
silex | Page 19 |
Part Number 40183-101 | |
