Silex technology SX-550 manual Serial Setting Parameters, Parameter Setting

Figure 17 Serial Settings Window

3. Configure the serial settings, as defined in Table 20.

	Table 20 Serial Setting Parameters
Parameter	Setting
Mode	Sets the line mode or serial port protocol.
	RS-232 provides an interface between data terminal equipment and
	data communications equipment employing serial binary data
	interchange over a wired connection with a maximum range of 50
	feet (16.5 meters).
	RS-422 provides a data transmission system using balanced
	differential signals or voltages to send serial binary data over a
	wired connection with a maximum range of 4,000 feet (1.2 km).
	Sets the line mode or serial port protocol.
	Values are:
	232 (default), 422, Disabled
Character Bits	Sets the bits per character
	Values are:
	8 (default), 7
Parity	Sets parity checking to detect any errors in transmission.
	Values are:
	None (default), Even, Odd, Mark, Space
Speed	Sets the baud rate for measuring for data transmission speed
	Values are:
	9600 (default), 115200 (console port default) 300, 600,1200, 2400,
	3600, 4800, 7200, 14400,19200, 38400, 57600, 76800, 230400,
	460800, 921600

Setting Configuration Parameters	silex	Page 35
	Part Number 40183-101