Silex technology SX-550 manual Installing ExtendView Utility

￿

Table 14 ExtendView System Requirements

Component

Requirement -- VERIFY

Personal Computer	133 MHz or higher
Microsoft Windows Operating System	98SE, ME, 2000, XP or 2003
RAM Memory	64 MB or greater
Hard Disk Space	10 MB or greater
CD-ROM Drive

The developer’s kit CD contains the ExtendView Utility software. In addition, you can download the software from the silex websites.

Installing ExtendView Utility

You can install the ExtendView Utility using the CD contained in your evaluation kit or accessing the website.

To install ExtendView from CD:

1.Power on the personal computer, then access the network.

2.Connect the SX-550 module to the network using an Ethernet cable.

3.Power on the SX-550 module.

4.Insert the silex CD in the CD-ROM drive of the computer. The CD should display automatically.

If not, click the Windows Start menu, and select Run>Browse, then select the CD. The Browse window displays.

5.Select Utilities, then ExtendView and select Setup. The Run window displays.

6.Click OK. The InstallShield Wizard displays. The InstallShield Wizard walks through the installation process.

7.Once install is complete, remove CD from CD-ROM drive.

8.Continue to the Using ExtendView Utility.

NOTE: You can also install ExtendView from the silex web site at www.silexamerica.com.

Page 24	silex	Accessing Configuration Parameters
	Part Number 40183-101