Silex technology SX-560 manual LCD Interface, UART0TXD, UART0RTS UART1TXD, UART1RTS UART2TXD

LCD Interface

A 16x2 LCD display is available as an option for the SX-560-6900 Evaluation Daughtercard. This LCD can be controlled from either Serial Port 2 or via the SPI interface. The LCD display plugs into header JP1. Header JP12 is used to select serial or SPI control (place a jumper on pins 1 and 2 to select serial, or place the jumper on pins 2 and 3 to select SPI).

OEM Interface Electrical Characteristics

Table 12 OEM Signal Parameter Descriptions

Parameter	Symbol	Condition	Minimum	Maximum	Unit
Input high voltage	Vih		2.0!		Volts
Input low voltage	Vil			0.8	Volts
Output high voltage	Voh	Ioh = 4mA	2.4		Volts
UART0_TXD, UART0_RTS,
UART1_TXD, UART1_RTS
UART2_TXD
Output low voltage	Vol	Iol = 8mA		0.4	Volts
UART0_TXD, UART0_RTS,
UART1_TXD, UART1_RTS
UART2_TXD
Output high voltage	Voh	Ioh = 8mA	2.4		Volts
GPIO 1 to 10, SPI, CS, SPI_SDO,
SPI_CLK, Reset_N
Output low voltage	Vol	Iol = 8mA		0.4	Volts
GPIO 1 to 10, SPI, CS, SPI_SDO,
SPI_CLK, Reset_N
Input Leakage Current	Ii	0 < Vin < 3.3v	-10	+10	∝A

Installing the Evaluation Daughtercard

Silex

Part Number 140-00192-100

Page 17