Silex technology manual Using a Web Browser to Configure the SX-560

Using a Web Browser to Configure the SX-560

You may skip this section if you have completely configured the SX-560 using ExtendView. However, if you have advanced configuration requirements, such as 802.1X EAP configuration, then you may need to use the internal web pages as described in this section because ExtendView does not support these capabilities.

After you have entered an IP address into the SX-560, you can use any standard web browser to access the internal web pages for configuring the SX-560. Simply specify the IP address of the SX-560 in your browser and then follow the steps below:

IMPORTANT: You must click the Submit button when you have finished configuring an internal web page. If you do not do this, your changes will not be saved.

1. When you have connected to the SX-560, you will get the Server Info page. Click Login on the left side of the screen.

2. Enter the password access and press Submit.

3. You will return to the Server Info page, but new options will be listed on the left side of the screen. Click on TCP/IP.

Page 26

Silex

Part Number 140-00192-100

Using the SX-560