Silex technology SX-560 manual SET Servi service name FRM, SET Servi service name FRS, DIsable

Command	Description
SET SERVI <service	Sets filter 1 text replacement match string index.
name> FMS	If the index is zero, the default string of <LF> (line feed) is used.
	The default value is 0.
	Format:
	SET SERVI <service name> FRM	nn
SET SERVI <service	Sets filter 1 text replacement replace string index.
name> FRS	If the index is zero, the default string of <CRLF> (carriage return-line feed) is
	used.
	The default value is 0.
	Format:
	SET SERVI <service name> FRS	nn
SET SERVI <service	Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
name> IP	The default value is enabled for service 1 and 2, disabled for all others.
	Format:
	SET SERVI <service name> IP	[ENable DIsable]
SET SERVI <service	Changes service name
name> NAme	The default value varies by service
	Format:
	SET SERVI <service name> NAme	<newname>
SET SERVI <service	Sets output port associated with a service
name> POrt	The default value is S1.
	Format:
	SET SERVI <service name> POrt	<portname>
SET SERVI <service	Sets priority for service for multiple service transmissions simultaneously
name> PRIority	The default value is 10.
	Format:
	SET SERVI <service name> PRIority nn
SH SERVI PRI	Shows priority of service.
[service_num]	If service_num is not provided, the priority of all services is listed.
SET SERVI <service	Sets receive only mode for a service
name> RECeive	This option is required only for host applications that do not operate properly
	if data is received from the serial device.
	The default value is disabled.
	Sample output:
	SET SERVI <service name> RECeive [ENable
	DIsable]

Page 82

Silex

Part Number 140-00192-100

Console Commands