
Command | Description |
|
|
SET SERVI <service | Sets raw TCP port for service |
name> TCP | If port number is 0, raw TCP is disabled on service. |
| |
| The default value is 9100 for service 1, 3001 for service 2. |
| Format: |
| SET SERVI <service name> TCP nn |
|
|
SH SERVI SUMmary | Shows the basic parameters for a specific service. If service_num is not |
[service_num] | provided, parameters for all services are displayed. |
| The command SH SERVI displays the same data as SHOW SERVI SUM. |
|
|
SNMP Commands
Table 38 SNMP Commands
Command |
| Description |
|
|
|
SET SNMP GETCOMM* | Gets community name |
|
| The default value is public. |
|
| Format: |
|
| SET SNMP GETCOMM | <string> |
|
| |
SET SNMP JETADmin | Enables or disables JetAdmin compatibility | |
| The default value is enabled. |
|
| Format: |
|
| SET SNMP JETADmin [ ENable DIsable] | |
|
|
|
SET SNMP | Sets community 1 name |
|
SETCOMM1* | The default value is internal? |
|
|
| |
| Format: |
|
| SET SNMP SETCOMM1 <string> | |
|
|
|
SET SNMP | Sets community 2 name |
|
SETCOMM2* | The default value is Pass. |
|
|
| |
| Format: |
|
| SET SNMP SETCOMM2 <string> | |
|
|
|
SET SNMP CONtact | Sets system contact string |
|
| The default value is null. |
|
| Format: |
|
| SET SNMP CONtact | <string> |
|
|
|
Console Commands
Silex
Part Number
Page 83