Silex technology SX-560 manual Server Information Commands, CL Port S1 JOB, SET Port S1 Size 7

Command	Description
CLEAR PORT S1	Aborts the active job on the port.
JOB	If the remote host is connected, additional data received will be discarded.
	Format:
	CL PORT S1 JOB
SET PORT S1	Sets serial port flow control to NONE, XON/XOFF, CTS, or DSR
FLOW	The default value is none.
	Format:
	SET PORT S1 FLOW <flow>
SET PORT S1	Sets serial port parity to NONE, EVEN, ODD, MARK, or SPACE
PARITY	The default value is none.
	Format:
	SET PORT S1 Parity <parity>
SET PORT S1	Sets data bits on the serial port
SIZE	The default value is 8.
	Format:
	SET PORT S1 SIZE [7 8]
SET PORT S1	Sets serial port baud rate. Options for BAUD are 300, 600, 1200, 2400, 7200, 9600,
Speed	19200, 38400, 57600, 115200, 230400, 460800, 921600
	The default value is 115200.
	Format:
	SET PORT S1 SPEED <baudrate>
SET PORT S1	Sets serial port stop bits per character
STOP	The default value is 1.
	Format:
	SET PORT S1 STOP [1 2]

Server Information Commands

Table 36 Server Information Commands

Command		Description
SET SERVEr	Sets server description string
Description	Format:
	SET SERVEr	DEscription <description-string>
SET SERVEr NAme	Sets server node name
	The default value is TWC_xxxxxx, where xxxxxx are the last 6 hex digits of the
	MAC address.
	Format:
	SET SERVEr	NAme <name>

Console Commands

Silex

Part Number 140-00192-100

Page 79