HandHeld Entertainment SV Series manual Incrementing Examples, Decrementing Examples

bbNumber of characters in array. A value of 00 clears (dis- ables) this array.

...!!!	Mask characters for defining positions in the data field not
	being checked.
...+++	Characters in the data field being checked. If + characters
	are used, this marks the field and defines its size. Maximum
	field lengths are 8 characters for numeric and 6 characters
	for alphanumeric. If a proper numeric or alphanumeric value
	is placed in the field, this additionally become the initial value
	expected on the first data scanned after a power-up or reset.
Incrementing Examples
~BI010!!!!!!!+++		Increment is to be done in the last three charac-
		ters of the 10 character array.
~BI010!!!!!!!234		Increment is to be done in the last three characters
		of the 10 character array. Initial value scanned
		must be 234.
~BI010!!!!!+++!!		Increment is to be done in location 6 through 8
		characters of the 10 character array.
Decrementing Examples
~BD010!!!!!!!+++		Decrement is to be done in the last three
		characters of the 10 character array.
~BD110!!!!!!!C34		Decrement is to be done in the last three
		characters of the 10 character array. The initial
		value scanned must be C34 (base 36
		alphanumeric field).
~BD010!!!!!+++!!		Decrement is to be done in location 6 through 8
		characters of the 10 character array.
~BI000 or ~BD000		Disable the Increment/Decrement array. The
		remainder of the array data is not required.

~BU#

Allows data match command ~BC to detect a Code 128 Function 1 character.

This allows a check to make sure function 1 characters (F1) are correctly placed in applications involving GS1-128 symbols. # = 0 or 1.

If ~BU0 is set - the ~BC command acts "normal" per the ~BC command description.

6 - 4 Quick Check® SV Series User’s Guide