Olivetti 2301 Shifting the starting position of copying, Set the type of paper that, Tray. p.20

TO FRONT TO REAR

COPY FUNCTIONS

BYPASS FEED (special paper)

The bypass tray must be used to feed special papers such as transparency film and labels. The bypass tray can also be used to feed standard copy paper.

1 Place the original(s). (p.22, p.23)

2 Insert the paper (print face down) all the way into the bypass tray.

For paper that can be used in the bypass tray, see "PAPER" (p.15). To load paper, see "Loading paper in the bypass tray" (p.18).

4 Select the number of copies and any other desired copy settings, and then press the [START] key ( ).

3 Touch the [PAPER SELECT] key or the tray in the image of the machine in the touch panel, and select the bypass tray.

	Set the type of paper that
EXPOSURE
	you loaded in the bypass
	tray. (p.20)

AUTO A4

PAPER SELECT

100%

Shifting the starting position of copying

When copying on a special size of paper in the bypass tray, the starting position of printing can be shifted vertically for fine adjustment of the image position. To adjust the starting position of printing, follow the steps below. This function can only be used when feeding special sizes of paper from the bypass tray.

1Touch the [PAPER SELECT] key and then touch the [EXTRA IMAGE ADJUST] key on the bypass tray.

2Use the key or key to adjust the printing position, and then touch the [OK] key.

	READY TO COPY.			0
			OK
EXTRA IMAGE ADJUST
0.0
		(-10 10)
		mm

• The position can be adjusted from -10 mm to +10 mm in 0.5 mm increments (-0.5 inch to +0.5 inch in 0.02 inch increments).

•When a setting from -10 mm to -0.5 mm (-0.5 inch to -0.02 inch) is selected, the starting position of printing is moved to front from the standard position. When a setting from +0.5 mm to +10 mm

(+0.02 inch to +0.5 inch) is selected, the starting position of printing is moved to rear.

26