Ultra electronic Prima 2e instruction manual Ink mode setting

Operation (continued)

Ink mode setting

Change settings according to the ink ribbon used.

> I n k > EXIT

Exit user mode

ENTER

			Display the ink ribbon type.	(YMCK:0, YMCKK:4 etc)
			Display only because of automatic setting by RF-ID
> > I n k	T y p e		(Setting is not possible)
		Y M C K : 0	• Yellow (Y), Magenta (M), Cyan (C) and Black (B)
			are provided as the standard ink ribbons. For the
EXIT		MENU	setting to YMCK+PO, consult with your dealer.
			CAUTION	• The YMCKK ink ribbon shall be
			used only when the face of card is printed by YMCK and
			the back by K,or the face by K and the back by YMCK.
			Otherwise some error may happen.
			Set the black value K
> > B l a c k		L e v e l	9 gradations can be set

(from –3 to +5, the larger the value the darker the printing)

		0 ( S t a n d a r d )	• Small characters printed in black ink may be blurred or
		MENU
EXIT			partially darkened. If this is the case, change the setting.
		Press		ENTER
			to select the setting value and press
		to save.	(The electronic beep sounds .The beep will not
			sound if the buzzer mode setting is set to off.)
> > B l a c k	M o d e	Set the K printing mode:2		options (Standard and Fine)

	S t a n d a r d		• Set to “Fine”mode if blurring still occurs after an
			increase in “Black Level.” The printing time slightly
			becomes longer in this setting.
EXIT	MENU		CAUTION • Set to “Fine” mode to avoid blurring
			when printing thin by 1 dot lines or small characters.
	Press		to select the setting value and press	ENTER
	to save.		(The electronic beep sounds .The beep will not
			sound if the buzzer mode setting is set to off.)
> > S P - I n k 1 L e v e l		Special ink SP-Ink 1, SP-Ink 2 darkness level.
		9 gradations can be set
o r
	- 2	(from –3 to +5, the higher the value the darker the printing.)
> > S P - I n k 2 L e v e l
			• Set this darkness level when using a special ink
	- 2		(not yet available).
EXIT	MENU	Press	to select the setting value and press	ENTER
		to save.	(The electronic beep sounds .The beep will
			not sound if the buzzer mode setting is set to off.)

31