Savin 2045 appendix Selecting a custom size, Enter the scan size area with the number keys

Initial Scanner Setup

Selecting a custom size

When selecting [Custom size] as the scan size, follow the procedure be- low.

A Press [Custom size] on the Scan Size Setting screen.

B Enter the original size with the number keys.

Select and enter values for [X1] and [Y1].

Depending on how the original is positioned, the scan area will be as shown.

	Original orientation		Original orientation
glass	X2	X3		X3	X2
	Y2
exposure	Y3		Y3		Y1
		Y1
			Y2		2
		X1		X1
When placed on the
	X2	X3	X2	X3
	Y2		Y2
the ADF	Y3		Y3		Y1
		Y1
		X1		X1
When placed on
					ZHSY055E

C Enter the scan starting point in re- lation to the standard scan start- ing point.

Select and enter values for [X2] and [Y2].

D Enter the scan size (area) with the number keys.

Select and enter values for [X3] and [Y3].

The range of possible original sizes and scan sizes is as follows:

•Original Size

X1: 10 mm - 432 mm (0.4” - 17.0”)

Y1: 10 mm - 297 mm (0.4” - 11.7”)

•Scan Size

X3: 10 mm - 432 mm (0.4” - 17.0”)

Y3: 10 mm - 297 mm (0.4” - 11.7”)

Keep the scan area settings within these range.

15