7.Using the Network TWAIN Scanner Function
This chapter describes the operations for scanning originals with the network TWAIN scanner using DeskTopBinder V2 Lite. In addition, the preparation for using the network TWAIN scanner and some functions of the TWAIN driver are introduced.
Preparation for Using the Network TWAIN Scanner
To use the machine as a network TWAIN scanner, the preparation described be- low is required.
1
Connect to Network
2
Make System Settings
3
Install Software
Connect the machine to the network with an Ethernet cable, IEEE 1394 (optional) cable, or use a wireless LAN (optional).
See Network Guide.
Check the network settings in System Settings, and change if re- quired.
See Network Guide.
On the client computers, install the software required for using the network TWAIN scanner functions, such as a TWAIN driver and DeskTopBinder V2 Lite.
See p.24 “Software for Using a Network TWAIN Scanner”.
75