Savin 2045 appendix Checking selected destinations

Using the Network Delivery Scanner Function

Checking selected destinations

A Use the destination field at the top of the screen to check which destinations are select- ed.

Note

❒When multiple destinations are selected, the selected des- tinations are displayed in the order they were selected by pressing [UPrev.] or [TNext].

❒Pressing the {Check Modes} key on the control panel lets you check the list of selected destinations.

5 G Make the basic settings.

To make the basic settings, recall stored settings or make the settings individually.

Reference

p.13 “Basic Settings”

Recalling stored scan settings

APress [Recall Program].

BSelect a user program of scan settings.

CPress [OK].

Making the settings individually

APress [Scan Settings].

BSelect items such as resolution and original size, and then change their settings.

Scan settings can be made in the same way as basic settings. See p.13 “Basic Settings”.

CPress [OK].

H Specify the sender (scan data file delivery source) if necessary.

Three methods are available for se- lecting a sender: selecting the sender from the list, entering the five-digit short ID number of the sender with the number keys, and searching for the sender and select- ing it.

Note

❒When a sender has been speci- fied, this information is added to the scan data file. Select a sender from the senders pro- grammed in the delivery server.

When selecting a sender from the list

APress [Attach Sender's Name].

The selected user program set- tings are applied.

56