Panasonic KX-FLB756AL You cannot change the cable type setting feature #15 on, Service personnel

Page 69

		Error Messages

	Display message	Cause & solution

		● You cannot change the cable type setting (feature #15 on page
	LINE IN USE
		63) while the line is in use. Hang up and try again.

		● When making a copy, the document being stored exceeds the
	MEMORY FULL	● When making a copy, the document being stored exceeds the
		memory capacity of the unit. Press {to clear the message.
		Divide the document into sections.

		● There is something wrong with the modem circuit. Contact our
	MODEM ERROR
		service personnel.

		● The other party’s fax machine is busy or has run out of recording
	NO FAX REPLY
		paper. Try again.

		● Recording paper is not installed or the unit has run out of paper.
	OUT OF PAPER
		Install paper (p. 19).

●Recording paper is not fed into the unit properly. Reinstall paper (p. 19).

	PAPER JAMMED	● A recording paper jam occurred. Clear the jammed paper (p. 76).


		● The cable or the PC power cord is not connected correctly. Check
	PC FAIL OR BUSY
		the connections (p. 51).

●The software is not running on the PC. Restart the software and try again.

	PLEASE WAIT		● The unit is warming up. Wait for a while.


			● The other party’s fax machine is busy or has run out of recording
	REDIAL	TIME OUT
			paper. Try again.

			● The document is jammed. Remove the jammed document (p. 78).
	REMOVE	DOCUMENT
			● Attempted to transmit a document longer than 600 mm. Press

{to remove the document. Divide the document into two or more sheets and try again.

	TONER EMPTY	● The toner cartridge is empty. Replace the toner cartridge (p. 74).


		● The remaining toner is low. Replace the toner cartridge as soon
	TONER LOW
		as possible (p. 74). We recommend you replace the drum unit
		every third time you replace the toner cartridge. To check the
		drum life and quality, please print the printer test list (p. 81).

		● A transmission error occurred. Try again.
	TRANSMIT ERROR	● A transmission error occurred. Try again.


		● The fax message was printed on paper which is shorter than A4
	WRONG PAPER
		size paper. Use the appropriate size paper (p. 19).

69

Image 69

Contents Model No. KX-FLB756AL For your future reference TrademarksCopyright For Australian users Installation Service difficultiesImportant information for Australian users Important safety instructions Safety instructionsOther Information Fuser unit Laser radiationToner cartridge Drum unitFor Best Performance Included accessories AccessoriesAccessory information Model No Usage SpecificationsTable of Contents Using the fax machine as a scanner Using the fax machine as a printerFax sending/receiving using Multi-Function Station software Advanced featuresHelp Button Help functionHelp SET Overview Finding the ControlsFront view Rear viewLocation Connecting the document cover SetupUnlocking the shipping lock Label for unlockingSurface Toner cartridge and drum unitToner save feature Turn the two levers on the tonerCartridge with firm pressure Paper stacker and paper tray Paper stackerPaper tray Adding paper Recording paperConnect the handset cord ConnectionsLonger, uncoiled end Telephone Handset cord line cord To use the fax machine with a computer on the same lineSetting the date and time Date and time, your logo and fax numberMenu SET Setting your logo Handset MuteRecall SET To select characters using +or To select characters with the dial keypadDisplay order of characters Setting your facsimile telephone number To delete a numberMenu Recall SET Adjusting volume VolumeRinger volume Handset receiver volumeAutomatic Dialling Storing names and telephone numbers into one-touch dialLower SET Stop Registered NAME= Storepress SET Editing a stored entry Erasing a stored entrySET Stop Using one-touch dial Using the directoryTo search for a name by initial To confirm caller information using the Caller ID list Caller ID service from your phone companyCaller ID How Caller ID is displayedStop FAX Start Caller ID Viewing and calling back using caller informationTo display the caller’s telephone number Display while viewingErasing caller information To cancel erasing, press , then p Press wDisplay Press w Stop SETFor navigator directory Press or Station keysLower SET Monitor REDIAL/PAUSE Scan Resolution FAX Start Using the auto document feederSending Faxes Sending a fax manuallyScan Resolution Stop FAX Start Using the scanner glassTo stop transmission Sending report for confirmationWhen the paper size is set to A4 When the paper size is set to LetterDocuments you can send Lower Resolution Scan FAX Start Stop Sending a fax using one-touch dial and navigator directoryProgramming entries into the broadcast memory Broadcast transmissionManual Broad Broadcast Manual Broad Menu Lower SETDisplay Press +or -until the following is Displayed Adding a new entry into the broadcast memoryErasing a stored entry in the broadcast memory To cancel erasing, press Press wTo send the same document using the scanner glass Manual Broad Stop Scan Resolution FAX Start SETTo cancel the broadcast setting Sending the same document to pre-programmed partiesWhen receiving calls When receiving phone Setting the unit to receive faxesWhen receiving faxes Receiving FaxesWhen receiving calls Turn Auto Answer off by pressing PQRemote fax activation TEL mode Answering all calls manually Activating TEL modeReceiving a fax manually FAX only mode All calls are received as faxes Activating FAX only modeIf the FAX on light is off, turn it on by pressing Display Setting up the fax machine and an answering machine Using the unit with an answering machineSet the fax machine to the desired receiving mode p Activate the answering machineReceiving phone calls How the fax machine and answering machine workAnswering machine will record voice messages automatically Receiving faxesUsing with the ring detection feature Receiving Faxes / Distinctive RingExtension telephone Stop Resolution Copy Start Stop Copy Start ResolutionCopying Making a copyUsing the scanner glass Using the auto document feederTo enlarge a document To reduce a documentConnecting to a computer Setup PCTo uninstall the software Installing Multi-Function Station softwareConnect the fax machine to the PC Important notice for USB cable usersActivating Multi-Function Station software Setting the printer properties Using the fax machine as a printerPrinting PC Printing from Windows applicationsLabels TransparenciesEnvelopes Using Multi-Function Viewer Using the fax machine as a scannerUsing other applications Scanning PCOperating the fax machine from your computer Remote Control PCPC Fax Fax sending/receiving using Multi-Function Station softwareViewing a received document Receiving a fax into your PCIf the fax machine’s memory stores a received fax document You can load the document into your PCFeatures Summary ProgrammingGeneral programming method How to set the basic features Basic featuresError Programming tableOFF ToneParallel How to set the advanced features Advanced featuresNormal Australia Reports Error MessagesDisplay Display message Cause & solutionWhen making a copy, the document being stored exceeds You cannot change the cable type setting feature #15 onService personnel Install paper pOperations When a function does not work, check hereGeneral Fax sendingReceiving mode Fax receivingCopying Multi-Function Station Using an answering machineEven after clicking Cancel, scanning continues If a power failure occursRemove the document and reinsert it Multi-Function Station does not work properlyReplacement Replacing the toner cartridge and the drum unitNew toner cartridge, shake it vertically Toner cartridge to snap into position Green drum surfaceWhen the recording paper has jammed in the unit Replacement / JamsRecording paper jam Waste disposal methodJams When the recording paper is not fed into the unit properlyDocument jams sending Jams / CleaningWhite plate and glasses White plate and scanner glassLower glass CleaningDocument feeder rollers Reference lists and reports Printed ReportsPress or until the desired item is Press wto start printingSpecifications Technical data about this productITU-T No Test Chart Paper specifications Code/Feature name IndexProgram index Index Index Page PFQX1948ZA KM0703DH0 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan