User Parameters
Setting Your LOGO
When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your transmission.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
Installing Your Machine
1
2
3
4
5
.
repeatedly until display shows;
Enter your LOGO (max. 25 characters and digits) by using the Keypad. (See page 17)
Ex: P A N A S O N I C
If you make a mistake, use or to move the cursor
one space beyond the incorrect character, press CLEAR then
If more than 19 characters are entered, the left side characters will scroll off the display.
SET MODE |
ENTER NO. OR ∨ ∧
1:USER PARAMETERS? PRESS SET TO SELECT
LOGO
❚
LOGO
PANASONIC❚
19