Polling
Preparing to be Polled
In order to let other stations poll your machine, you must prepare your machine with a document stored in memory. Be sure to set the polling password before storing the document into memory. After being polled, the documents stored in the memory will be erased automatically. To retain the documents in memory so that they can be polled repeatedly change Fax Parameter No. 27 (POLLED FILE SAVE) to "Valid".
Make sure that the FAX/EMAIL lamp is ON. If not, press 
to select the "FAX/EMAIL" mode.
1a 
Place original(s) face up on the ADF.
or
1b 
1Place a book or an original face down on the Platen Glass.
2Press ORIGINAL SIZE to select the original size.
ENTER STATION(S) THEN PRESS START 00%
2
3
4
5
Enter a
Ex: 4 3 2 1
The document(s) will be stored into memory.
POLLING NO.=❚ 1:POLLING 2:POLLED
POLLED PASSWORD=1234
POLLED PASSWORD=4321
* STORE * | NO.015 |
PAGES=001 01%
*STORE * COMPLETED TOTAL PAGES=005 24%
NOTE
1.You can still send or receive documents even when set to be polled.
2.Only 1 polled file can be stored in memory. If you need to add document(s) into the same polled file, see page 84.
3.If you have set the polling password in Fax Parameter No. 26, the password will appear on the display. You can still change the password temporarily by overwriting it with a new one.
70