Transcend Information III manual Connecting to the Network, Connecting to the On-board Transceiver

Page 19

Connecting to the Network

2-5

Connecting to the Network

You must connect the adapter to the network before installing the drivers.

This section describes how to connect different types of network cables to the 3C592 EISA adapters. Table 2-1 lists the types of network cable connectors that are found on 3C592 EISA adapters.

Table 2-1 Connectors for 3C592 EISA Adapters

Cable Type

Connector

Transceiver Type

 

 

 

Thick coaxial

AUI

External

Twisted-pair

RJ-45

On-board TP

Thin coaxial

BNC

On-board coax

 

 

 

Connecting to the On-board Transceiver

Each 3C592 EISA adapter is equipped with an on-board transceiver to allow easy connection to the network.

Connecting to Thin Ethernet Cable

The 3C592-COMBO adapter is factory-set to use the on-board transceiver as the default with thin Ethernet cable.

1Connect the T connector to the adapter’s BNC connector (see Figure 2-3).

RJ-45 connector

AUI connector

BNC

connector

Thin Ethernet cable

Figure 2-3 Connecting Thin Ethernet Cable

Image 19
Contents Adapters 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Performing Troubleshooting and Diagnostic Tests Cispr B Compliance Figures Tables About this Guide How to Use This GuideIntroduction Print autolink.log ConventionsIntroduction Features Optional Adapter Installing the EisaInspecting the Adapter Installing the Boot PromInserting the Adapter PCI and Eisa Bus Slots in an Eisa Computer Name of the installed 3Com adapter appears, as shown below Confirming Adapter InstallationList of devices appears, arranged by type Connecting to the On-board Transceiver Connecting to the NetworkConnecting to Thin Ethernet Cable Connecting to an External Transceiver Slide Latch Auto Select Media Type Adapter Configuration Overview ConfiguringConfiguring the Adapter Using a NOS Other Than WindowsUsing Windows Software Option Settings Network Driver Optimization Media TypeFull Duplex Type at the prompt Changing the SettingsI N N U Press Tab to highlight OK. Press Enter Continue this procedure with any of the other optionsSelect Adapter Installed Adapters Drivers Loading NetworkLocating the Network Drivers Accessing DOSOne Adapter in a Client Loading NetWare ODI DriversAutoLink Requirements Alternatively, at the prompt, type At the prompt, typeAutoLink Information Screen To print the file, type Multiple Adapters in a ClientWhen the program has finished a Save the configuration Repeat a for the second adapter Reboot the computer Finding the Adapter’s Slot NumberMain menu appears One Adapter in a Server For NetWare 3.12, 4.0x, or Multiple Adapters in a ServerFinding the Adapter’s Port Address for Multiple Adapters Bind IPX to X NET=XXXX Bind IPX to Y NET=XXXX Click OK This imports the driver from the EtherDisk diskette Loading Windows 95 DriversNdis Drivers Loading Drivers in Non-NetWare EnvironmentsAdditional Drivers Using Transcend PC Link SmartAgent SoftwareDesktop Management Interface Troubleshooting Overview Performing Troubleshooting Diagnostic TestsTroubleshooting with the Diagnostic Tests Starting the Diagnostic Program Starting the Diagnostic ProgramRunning the Group 1 Tests Assembling a Loopback Plug Running the Group 2 TestRunning the Group 3 Test Setting Up an Echo ServerStart the diagnostic program on the echo server Getting Help If a Test Fails If this test fails, try another loopback plug To change the test parameters, follow these steps Changing the Test SetupLink Beat LED Miscellaneous ChecksAdapter Specifications SpecificationsAUI Connector Pin Assignments RJ-45 Connector Pin AssignmentsFor unshielded twisted-pair UTP connections 100 ohm Cable RequirementsRG59 B/U 50 ohm Technical Support On-line Technical Services3Com Bulletin Board Service Access by ModemTo use ThreeComForum Log on to CompuServe 3ComFacts Automated Fax ServiceWorld Wide Web Site ThreeComForum on CompuServeLocal numbers are available within the following countries Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairAUI cable GlossaryEcho server BackboneBackplane BusEthernet EMM386Twisted-pair Index SymbolsNumerics Eisa fiber-optic Windows 3.X 4-3 Windows 95 1-2, 3-3 Limited Warranty Santa Clara, CA 95052-8145 408 Interference Handbook CE Notice