Transcend Information III manual Start the diagnostic program on the echo server

Starting the Diagnostic Program 5-7

3Start the diagnostic program on the echo server.

The diagnostic program that you use depends on the adapter that is installed in the echo server. After the system prompt of the drive containing the Configuration and Diagnostic Program, enter the name of the appropriate program (for example, 3C523) from Table 5-1.

Table 5-1 Diagnostic Programs

Diagnostic
Program Name	Adapter in the Echo Server
3C503.EXE	EtherLink II or II TP, EtherLink II/16 or II/16 TP
3C505.EXE	EtherLink Plus
3C507.EXE	EtherLink 16 or EtherLink 16 TP
3C5X9CFG.EXE	EtherLink III family
3C523.EXE	EtherLink/MC
3C523TP.EXE	EtherLink/MC TP
3C527.EXE	EtherLink/MC 32
3C59XCFG.EXE	EtherLink III EISA, EtherLink III PCI, Fast EtherLink
	PCI, and Fast EtherLink EISA

The diagnostic programs listed above come on the EtherDisk diskette that accompanied the adapter.

4Select Echo Server Setup on the main menu.

The program notifies you that your computer is now set up as an echo server.

Starting the Group 3 Test

To run the Group 3 test on a 3C592 EISA adapter, follow these steps:

1Start the Configuration and Diagnostic Program.

This program must be on the computer containing the adapter you want to test.

2Select Test Setup from the Test menu.

3Select Group 3 from the Group Select box.