Transcend Information III manual EMM386, Ethernet

Page 69

GLOSSARY 3

EISA

Extended Industry Standard Architecture. The EISA 32-bit extended AT personal computer bus architecture is backward-compatible with the 16-bit ISA architecture.

EMM386

Expanded Memory Manager. A dual-purpose memory manager that comes with MS-DOS. It provides access to the upper memory area, which enables you to free conventional memory by running device drivers in upper memory. EMM386 also uses extended memory to simulate expanded memory. Refer to Microsoft documentation for additional information.

Ethernet

A local area network standard defining a physical medium and its method of placing data, or packet signaling, on a cable. Access to the cable is based on CSMA/CD (carrier sense multiple access with collision detection).

ISA

Industry Standard Architecture. A 16-bit extension of the original IBMPC bus architecture. The IBM Personal Computer ATbus.

Loopback

A type of diagnostic test in which the transmitted signal is returned to the sending device after passing through all, or a portion of, a data communications link or network. A loopback test permits the comparison of a returned signal with the transmitted signal.

NDIS

Network Driver Interface Specification. Defines the LAN Manager network driver architecture and interfaces that let a DOS or OS/2 system support network adapters. This architecture provides a standardized way to write drivers for network adapters.

Image 69 Contents
Adapters 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Lifetime Warranty France, Israel Contents Performing Troubleshooting and Diagnostic Tests Cispr B Compliance Figures Tables How to Use This Guide About this GuideIntroduction Print autolink.log ConventionsIntroduction Features Optional Adapter Installing the EisaInstalling the Boot Prom Inspecting the AdapterInserting the Adapter PCI and Eisa Bus Slots in an Eisa Computer Confirming Adapter Installation Name of the installed 3Com adapter appears, as shown belowList of devices appears, arranged by type Connecting to the Network Connecting to the On-board TransceiverConnecting to Thin Ethernet Cable Connecting to an External Transceiver Slide Latch Auto Select Media Type Adapter Configuration Overview ConfiguringConfiguring the Adapter Using a NOS Other Than WindowsUsing Windows Software Option Settings Media Type Network Driver OptimizationFull Duplex Type at the prompt Changing the SettingsI N N U Press Tab to highlight OK. Press Enter Continue this procedure with any of the other optionsSelect Adapter Installed Adapters Drivers Loading NetworkLocating the Network Drivers Accessing DOSOne Adapter in a Client Loading NetWare ODI DriversAutoLink Requirements Alternatively, at the prompt, type At the prompt, typeAutoLink Information Screen To print the file, type Multiple Adapters in a ClientWhen the program has finished a Save the configuration Reboot the computer Finding the Adapter’s Slot Number Repeat a for the second adapterMain menu appears One Adapter in a Server For NetWare 3.12, 4.0x, or Multiple Adapters in a ServerFinding the Adapter’s Port Address for Multiple Adapters Bind IPX to X NET=XXXX Bind IPX to Y NET=XXXX Click OK This imports the driver from the EtherDisk diskette Loading Windows 95 DriversNdis Drivers Loading Drivers in Non-NetWare EnvironmentsAdditional Drivers Using Transcend PC Link SmartAgent SoftwareDesktop Management Interface Troubleshooting Overview Performing Troubleshooting Diagnostic TestsTroubleshooting with the Diagnostic Tests Starting the Diagnostic Program Starting the Diagnostic ProgramRunning the Group 1 Tests Assembling a Loopback Plug Running the Group 2 TestRunning the Group 3 Test Setting Up an Echo ServerStart the diagnostic program on the echo server Getting Help If a Test Fails If this test fails, try another loopback plug To change the test parameters, follow these steps Changing the Test SetupLink Beat LED Miscellaneous ChecksAdapter Specifications SpecificationsAUI Connector Pin Assignments RJ-45 Connector Pin AssignmentsCable Requirements For unshielded twisted-pair UTP connections 100 ohmRG59 B/U 50 ohm 3Com Bulletin Board Service On-line Technical ServicesAccess by Modem Technical SupportWorld Wide Web Site 3ComFacts Automated Fax ServiceThreeComForum on CompuServe To use ThreeComForum Log on to CompuServe Local numbers are available within the following countries Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairAUI cable GlossaryBackplane BackboneBus Echo serverEthernet EMM386Twisted-pair Symbols IndexNumerics Eisa fiber-optic Windows 3.X 4-3 Windows 95 1-2, 3-3 Limited Warranty Santa Clara, CA 95052-8145 408 Interference Handbook CE Notice