Identification
The identification screens display the following UPS information:
SType and model
SPart number
SSerial number
SUPS firmware
SComm firmware
SNetwork Management Card firmware
NOTE: The NMC firmware screen displays only if the Network Management Card is installed. See “Dell Network Management Card“ on page 56.
Settings
Only available options are displayed.
User settings are not protected by default. You can enable the password through the User Password setting.
Table 7 displays the options that can be changed by the user.
Table 7. Settings
Description | Available Settings | Default Setting |
|
|
|
Change Language | [English] [French] [German] [Spanish] [Japanese] | English |
| [Simplified Chinese] [Russian] [Korean] |
|
| [Traditional Chinese] |
|
|
|
|
User Password | [Enabled] [Disabled] | Disabled |
| If Enabled, the default password is USER. |
|
| NOTE: If you enter an incorrect password, the |
|
| message “Wrong Password” appears. Press any |
|
| button to return to the password screen and retry |
|
| the password. |
|
|
|
|
Audible Alarms | [Enabled] [Disabled] | Enabled |
| NOTE: If you disable audible alarms, it takes effect |
|
| instantly and remains disabled, even after a power |
|
| cycle. This feature differs from the mute feature |
|
| where the horn is temporarily silenced on any |
|
| button press, but turns on again if a new alarm is |
|
| triggered. |
|
|
|
|
42 Operation