American Power Conversion MX28B400 Relay, Out-Rly 1 Dly m+, Sec, Out-Rly 6 Dly m+, 1111, 2222

Parameter Locations, Descriptions, and Default Values

PARAMETER NAME/	DESCRIPTION	DISPLAY SCREENS /
[MENU LOCATION]		DEFAULT SETTINGS
Output Relay 1 Alias	An alternate name (alias) can be	Out-Rly 1	m+
Security Level {1}	assigned to Output Relay 1 if desired.	Relay 1
[SYSTEM/OUT-RLY/ALIAS]	•	•
•	•
		•
•	•
		•
•	An alternate name (alias) can be
Output Relay 6 Alias {1}	assigned to Output Relay 6 if desired.	Out-Rly 6	m+
[SYSTEM/OUT-RLY/ALIAS]		Relay 6
Output Relay 1 Delay	Delay between sensing of the alarm	Out-Rly 1 Dly m+
Security Level {1}	condition and activation of Output Relay	0 sec
[SYSTEM/OUT-RLY/RLY-	1. An alarm condition must exist for
MAP]	longer than the delay to be activated.	•
•	•
		•
•	•
•	Delay between sensing of the alarm	•
Output Relay 6 Delay	condition and activation of Output Relay	Out-Rly 6 Dly m+
Security Level {1}	6. An alarm condition must exist for	0 sec
[SYSTEM/OUT-RLY/RLY-	longer than the delay to be activated.
MAP]
Output Relay Major Alias	An alternate name (alias) can be	Relay Major
Security Level {1}	assigned to the major Relay if desired.	m+
[SYSTEM/OUT-RLY/ALIAS]		Major
Output Relay Minor Alias	An alternate name (alias) can be	Relay Minor
Security Level {1}	assigned to the Minor Relay if desired.	m+
[SYSTEM/OUT-RLY/ALIAS]		Minor
PIN 1 change	Permanently change password (PIN) that	PIN	m+
Security Level {2}	permits security Level 1 parameter
[SYSTEM/SETUP]	changes - limited access.	1111
PIN 2 Change	Permanently change password (PIN) that	PIN 2	m+
Security Level {2}	permits security Level 2 parameter
[SYSTEM/SETUP]	changes - unlimited access.	2222
PIN Entry	Screen for entry of the active password	PIN	m+
Security Level {0}	(PIN). Before any changes can be	0000
[PIN]	made, the correct pin for the desires
	security level must be entered. Level 0 –
	full read access. Level 1 –full read and
	limited write access. Level 2 – full read
	and write access.
Rectifier Communications Fail	The maximum rectifier communications	RectFailComm	m+
Timeout	response time allowed before a	1 min
Security Level {1}	communications failure is declared.
[MODULES/RECT/PARAM]
Rectifier Configuration Alarm	The output relay energized if the rectifier	Rect Cfg Alm	m+
Security Level {1}	configuration differs from its stored	Minor
[SYSTEM/SET-ALM]	configuration. This occurs if a rectifier is
	added after configuration.

MX28B400 +24 VDC User’s Manual Page 30